Changes

[[File:Fmb630 tacho data.PNG|center]]

[[File:Fmb630 tacho data.PNG|center]]

<br>

<br>

To configure any Tachograph Data parameter, every parameter should be separated with comma. For example, configuring first profile Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID does not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.

To configure any Tachograph Data parameter, every parameter should be separated with comma. For example, configuring first profile Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID does not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic.

For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution|This Page.]]

For more information about tachograph solution visit [[FM63XX/FMB630_and_FMB640_and_Tachograph_Solution|This Page.]]

==External links==

==External links==