FMB630 Tachograph Data

Main Page > EOL Products > FMB630 > FMB630 Configuration > FMB630 Tachograph Data

Tachograph Data


Tachograph Data functionality allows user to monitor and use for incoming data from Tachograph via K-line. Kline periodic record timeout parameter is used to set interval between K-Line records. Those records aren't included in standard record and will be sent as separate packet. Priority settings are used for prioritization of incoming data from different lines.


To configure any Tachograph Data parameter, every parameter should be separated with comma. For example, configuring first profile Driver 2 ID by SMS, SMS should look like: “ setparam 1062 1,,,3” (“ setparam 1062 <Priority>,<HighLevel>,<LowLevel>,<generateEvent>”) Driver 2 ID does not have High/Low level so they are skipped by using comma “,,“ Other Kline properties can be configured in the same logic. For more information about tachograph solution visit This Page.


External links

https://teltonika.lt/product/tachograph-web/
https://wiki.teltonika-gps.com/view/FM63XX/FMB630_and_FMB640_and_Tachograph_Solution