633
edits
Changes
no edit summary
{{Template:MTB100 First start card|model=FMB910 Basic|pic=[[Image:FMB910-2000x2000-1.png|450px|right]]
{{Template:MTB100 First start card|model=FMB910 Basic|pic=[[Image:4000x4000 FMB910 1.png|450px|right]]
||sim_pin=[[FMB910 Security info|'''Security info''']]
||sim_pin=[[FMB910 Security info|'''Security info''']]
|without_battery=
|without_battery=
{{Template:FMB First start config|model=FMB910|config_link=[[FMB910 Configuration|here]]|cfg_connect=Configurator_connect-FMB910.jpg|dc_voltage=6-30 V|led_status_link=[[FMB910 LED status]]|power_cable=power cable|first_time=FMB status screen-FMB910.jpg
{{Template:FMB First start config|model=FMB910 Basic|config_link=[[FMB910 Configuration|here]]|cfg_connect=Configurator_connect-FMB910.jpg|dc_voltage=6-30 V|led_status_link=[[FMB910 LED status]]|power_cable=power cable|first_time=FMB status screen-FMB910.jpg
|PCConnection = ===PC Connection (Windows)===
|PCConnection = ===PC Connection (Windows)===
{{{fmb_powerup|# Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}
{{{fmb_powerup|# Power-up FMB910 Basic with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}
# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''
# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''
#* You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
#* You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
|plugged_in=
|plugged_in=
|FMB2_installation_instruction=
|FMB2_installation_instruction=
==Installation photos==
FMB910 is the device that has internal GNSS and GSM antenna.
<br />
Device should be mounted with the sticker view to the open sky (metal free). FMB910 area with sticker is shown in figure below:
<br />
[[File:FMB910_600X600_1.png|center|400px]]
<br />
FMB910 can be mounted under the plastic panel behind the front window, with the sticker / engraving direction to a window (sky). It is recommended to place FMB910 behind dashboard as close to the window as possible or in a place that is not covered with metal and has no moving parts if you are using it on a motorcycle.
<br />
SIM card should be inserted in the module while the connector is plugged off (while module has no power).
<br />
[[File:FMB9YX.png|center|400px]]
|FMB0_3_nominal=
|FMB0_3_nominal=
|voltage={{{voltage|+6..+30}}}
|voltage={{{voltage|+6..+30}}}