FMB go2sleep

From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:29, 27 December 2023 by Airidas.S (talk | contribs) (Created page with "This command supported from 03.27.10.Rev.482 evaluation firmware version, instantly puts device to sleep ignoring going to sleep condition and stays asleep for the set time.<b...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

This command supported from 03.27.10.Rev.482 evaluation firmware version, instantly puts device to sleep ignoring going to sleep condition and stays asleep for the set time.

SMS format: go2sleep:#
'#' – time in minutes

Response example: Device will wake up after -> Hours:2 Minutes:25

Sleep mode which the device goes to depends on the device:

  • FMB965 and FMB930 devices - Power Off sleep.
  • All other FMB devices - Ultra sleep.

Note !

  • When putting a device to sleep via this SMS/GPRS command, accelerometer gets turned off as a wake up source, so device won't wake up from ultra or power off sleep due to movement.