Difference between revisions of "FMB setdigout"
From Wiki Knowledge Base | Teltonika GPS
Atabasnikov (talk | contribs) m (Protected "FMB setdigout" ([Edit=Allow only autoconfirmed users] (indefinite) [Move=Allow only autoconfirmed users] (indefinite))) |
m |
||
| Line 1: | Line 1: | ||
{{Template:FMB FW development notice}} | {{Template:FMB FW development notice}} | ||
| − | Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).<br/>Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level | + | Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON). |
| + | <br/><br/> | ||
| + | For devices with 2 digital outputs:<br> | ||
| + | Example:<br/>"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds. | ||
| + | <br/><br/> | ||
| + | Example:<br/>"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time. | ||
| + | <br/><br/> | ||
| + | Example:<br/>"setdigout 11 30" will set DOUT1 to high level for infinite time and DOUT2 to high level for 30 seconds. | ||
| + | <br/><br/> | ||
| + | For devices with 1 digital output:<br> | ||
| + | Example:<br/>"setdigout 1 45" will set DOUT1 to high level for 45 seconds. | ||
Revision as of 10:24, 30 May 2018
Sets digital outputs to ON or OFF state (timeout is valid only when DOUT state is changing from OFF to ON).
For devices with 2 digital outputs:
Example:
"setdigout 01 30 60" will set DOUT1 to low level for 30 seconds and DOUT2 to high level for 60 seconds.
Example:
"setdigout 11" will set DOUT1 and DOUT2 to high level for infinite time.
Example:
"setdigout 11 30" will set DOUT1 to high level for infinite time and DOUT2 to high level for 30 seconds.
For devices with 1 digital output:
Example:
"setdigout 1 45" will set DOUT1 to high level for 45 seconds.
