2,410
edits
Changes
→Battery placement after complete device disassembling
<br />
<br />
<br />
<br />
# Using double sided tape, stick internal battery to the bottom part of the device case. Battery should be glued approximately 15 millimeters from the bottom wall of the case. ''Picture on the left''.
# Using double sided tape, stick internal battery to the bottom part of the device case. Battery should be glued approximately 16 millimeters from the bottom wall of the case. ''Picture on the left''.
# Connect battery to the PCB.
# Connect battery to the PCB.
# Gently place PCB into the bottom case.
# Gently place PCB into the bottom case.
