Wiki Knowledge Base | Teltonika GPS

Changes

FMC234 First Start (view source)

Revision as of 15:04, 4 December 2023

10,051 bytes added ,  15:04, 4 December 2023
m
no edit summary
Line 1: Line 1: −
{{Template:FMX2YX First start card withoutSD|model=FMC234|Image_SIM_insertion=[[Image:FMX2YX_SIM_insert_FMC230.png|280px]]|description=GNSS/GSM/Bluetooth tracker with internal GNSS/GSM antennas, internal battery and IP67 protection||pic=[[Image:597414 FMC234-MCIBO-side-2023-09-12 v1.png|400px|right]]|dual_sim=|sim_pin=[[FMC234 Security info|'''Security info''']]}}
+
[[Image:Qsg_rut950_teltonika.PNG|centre]]
 +
 
 +
<b>{{{description|GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas}}}</b>{{{pic|[[Image:597414 FMC234-MCIBO-side-2023-09-12 v1.png|400px|right]]}}}
 +
 
 +
__TOC__
 +
 
 +
=='''How to insert {{{sim_type|Micro-}}}SIM card and connect battery'''==
 +
 
 +
1. You will receive your device partly closed.<br>
 +
2. Gently remove top and bottom covers.<br>
 +
3. Insert SIM card as shown with PIN request disabled or read our Wiki how to enter it later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing outward from slot. SIM slot 1 is closer to PCB, SIM slot 2 is the top one. <br>
 +
4. Connect battery as shown to device. Position the battery in place where it does not obstruct other components. <br>
 +
5. After configuration, see “PC Connection (Windows)”, attach device top and bottom cover back and press them twice to the full closure. <br>
 +
6. Make sure that product casing is closed correctly. <br>
 +
 
 +
[[Image:FMC234 01-1.2.png|280px]]
 +
[[Image:FMC234 02-1.2.png|280px]]
 +
[[Image:FMC234 03-1.2.png|280px]]
 +
[[Image:FMC234 04-1.2.png|middle|280px]]
 +
[[Image:FMC234 05-1.2.png|middle|280px]]
 +
[[Image:FMX2YX_cover6_correct.png|middle|280px]]
 +
 
 +
{|
 +
|-
 +
| [[File:Alert.png|left|link=]] || This device has an IP67 casing with a two-phase closing, that ensures a reliable protection and ease of use. Please make sure that product casing corner clips are fixed tightly and cable is connected to the device in order to maintain the degree of IP67 protection.
 +
|}
 +
 
 +
 
 
== '''Battery placement after complete device disassembling''' ==
 
== '''Battery placement after complete device disassembling''' ==
 
{|
 
{|
Line 17: Line 44:  
|6. Next, press each corner of the chassis individually (you will hear the hook attaching).
 
|6. Next, press each corner of the chassis individually (you will hear the hook attaching).
 
|}
 
|}
 +
    
'''2x6 socket pinout'''
 
'''2x6 socket pinout'''
Line 78: Line 106:  
        
 
        
   −
{{Template:FMB First start config|model=FMC234|config_link=[[FMC234 Configuration|here]]|cfg_connect=Configurator connect-FMC234.jpg|first_time=FMB status screen-FMC130.jpg|dc_voltage=10-30 V|led_status_link=[[FMC234 LED status]]|family=FMB1}}
+
{{{PCConnection|
 +
===PC Connection (Windows)===
 +
 
 +
{{{fmb_powerup|# Power-up {{{model|FMB1YX}}} with '''DC voltage {{{dc_voltage|(10 – 30 V)}}}''' power supply {{{additional_power_supply|}}} using '''{{{power_cable|supplied power cable}}}'''. LED’s should start blinking, see “'''{{{led_status_link|LED behaviour description}}}'''”.}}}
 +
# Connect device to computer using '''{{{usb_cable|Micro-USB}}} cable'''{{{Bluetooth_connection| or '''Bluetooth''' connection:  
 +
#* Using '''{{{usb_cable|Micro-USB}}} cable'''
 +
#** You will need to install USB drivers, see "[[#How to install USB drivers (Windows)|'''How to install USB drivers (Windows)''']]"
 +
#* Using '''Bluetooth'''
 +
#** {{{model|FMB1YX}}} Bluetooth is enabled by default. Turn on '''Bluetooth''' on your PC, then select '''Add Bluetooth or other device > Bluetooth'''. Choose your device named – “'''{{{model|FMB1YX}}}_last_7_imei_digits'''”, without '''LE''' in the end. Enter default password '''5555''', press '''Connect''' and then select '''Done'''.}}}
 +
# You are now ready to use the device on your computer.
 +
}}}
 +
===How to install USB drivers (Windows)===
 +
 
 +
# Please download COM port drivers from '''[[Media:TeltonikaCOMDriver.zip|here]]'''.
 +
# Extract and run '''TeltonikaCOMDriver.exe'''.
 +
# Click '''Next''' in driver installation window.
 +
# In the following window click '''Install''' button.
 +
# Setup will continue installing the driver and eventually the confirmation window will appear. Click '''Finish''' to complete the setup.
 +
 
 +
===Configuration (Windows)===
 +
 
 +
At first {{{model|FMB1YX}}} device will have default factory settings set. These settings should be changed according to the user's needs.<br/>
 +
Main configuration can be performed via '''[[Teltonika Configurator]]''' software. Get the latest {{{model|FMB1YX}}} '''Configurator''' version from '''[[{{{SAS_Configurator_Versions|Teltonika Configurator versions}}}|here]]'''. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework. Make sure you have the correct version installed.
 +
 
 +
{| class="wikitable" style="width:50%;"
 +
|+
 +
! colspan="4" style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| MS .NET requirements
 +
|-
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Operating system
 +
! style="width:25%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| MS .NET Framework version
 +
! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Version
 +
! style="width:5%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;"| Link
 +
|-
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | <ul style="list-style: none; margin: 0px;">
 +
<li>Windows Vista</li>
 +
<li>Windows 7</li>
 +
<li>Windows 8.1</li>
 +
<li>Windows 10</li>
 +
</ul>
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | {{{MS .NET Framework|MS .NET Framework 5.0}}}
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | 32 and 64 bit
 +
| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | {{{MS .NET Framework link|[https://dotnet.microsoft.com/en-us/download/dotnet-framework/net462 .NET Framework]}}}
 +
|}
 +
 
 +
Downloaded '''Configurator''' will be in compressed archive. Extract it and launch '''Configurator.exe'''. After launch software language can be changed by clicking [[File:Language_logo.png|25px|link=]] in the right bottom corner:
 +
 
 +
[[File:FMB_Configurator_languag.jpg|400px]]
 +
 
 +
Configuration process begins by pressing on connected device:
 +
 
 +
[[File:{{{cfg_connect|Configurator_connect-FMB150.jpg}}}|400px]]
 +
 
 +
After connection to Configurator '''Status window''' will be displayed:
 +
{{{Status window image|[[Image:{{{model|FMB120}}} Beacon-info-{{{family|FMB1}}} series.png|1000px|none]]}}}
 +
 
 +
 
 +
Various '''[[{{{model|FMB1YX}}}_Status_info|Status window]]''' tabs display information about '''[[{{{model|FMB1YX}}}_Status_info#GNSS_Info|GNSS]], [[{{{model|FMB1YX}}}_Status_info#GSM_Info|GSM]], [[{{{model|FMB1YX}}}_Status_info#I.2FO_Info|I/O]], [[{{{model|FMB1YX}}}_Status_info#Maintenance|Maintenance]]''' and etc. {{{model|FMB1YX}}} has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using '''Save to device''' button. Main buttons offer following functionality:<br/>
 +
# [[File:Load_from_device.png|25px|link=]] '''Load from device''' – loads configuration from device.
 +
# [[File:Save_to_device.png|25px|link=]] '''Save to device''' – saves configuration to device.
 +
# [[File:Load_from_file.png|25px|link=]] '''Load from file''' – loads configuration from file.
 +
# [[File:Save_to_file.png|25px|link=]] '''Save to file''' – saves configuration to file.
 +
# {{{Firmware_button| [[File:Firmware_update.png|25px|link=]] '''Update firmware''' – updates firmware on device.}}}
 +
# [[File:Read_records.png|25px|link=]] '''Read records''' – read records from device.
 +
# [[File:Reboot_device.png|25px|link=]] '''Reboot device''' – restarts device.
 +
# [[File:Reset_configuration.png|25px|link=]] '''Reset configuration''' – sets device configuration to default.
 +
 
 +
Most important configurator section is GPRS – where all your server and '''[[{{{model|FMB1YX}}}_GPRS_settings|GPRS settings]]''' can be configured and '''[[{{{model|FMB1YX}}}_Data_acquisition_settings|Data Acquisition]]''' – where data acquiring parameters can be configured.
 +
More details about {{{model|FMB1YX}}} configuration using Configurator can be found '''{{{config_link|in the manual}}}'''.
 +
 
 +
===Quick SMS configuration===
 +
 
 +
Default configuration has optimal parameters present to ensure best performance of track quality and data usage.<br/>
 +
Quickly set up your device by sending this SMS command to it:
 +
 
 +
"  setparam <span style="background-color:#91b9d4;">2001</span>:APN;<span style="background-color:#91d4b9;">2002</span>:APN_username;<span style="background-color:#b991d4;">2003</span>:APN_password;<span style="background-color:#b9d491;">2004</span>:Domain;<span style="background-color:#d491b9;">2005</span>:Port;<span style="background-color:#d4b991;">2006</span>:0"
 +
 
 +
<div style="column-count:2;-moz-column-count:2;-webkit-column-count:2">
 +
GPRS settings:
 +
* <span style="background-color:#91b9d4;">2001</span> – APN
 +
* <span style="background-color:#91d4b9;">2002</span> – APN username (if there are no APN username, empty field should be left)
 +
* <span style="background-color:#b991d4;">2003</span> – APN password (if there are no APN password, empty field should be left)
 +
Server settings:
 +
* <span style="background-color:#b9d491;">2004</span> – Domain
 +
* <span style="background-color:#d491b9;">2005</span> – Port
 +
* <span style="background-color:#d4b991;">2006</span> – Data sending protocol (0 – TCP, 1 – UDP)
 +
</div>
 +
 
 +
'''Note''': Before SMS text, two space symbols should be inserted.<br/><br/>
 +
[[File:IOS sms cfg.png|235px|right]]
 +
 
 +
{{{quick_sms_tmt|<table style="width:70%">
 +
  <tr>
 +
    <td colspan="4">'''Default configuration settings'''</td>
 +
  </tr>
 +
  <tr>
 +
    <td colspan="4">Movement and ignition detection:</td>
 +
  </tr>
 +
  <tr>
 +
    <td>[[File:Accelerometer.png|65px]]</td>
 +
    <td>Vehicle movement will be detected by accelerometer</td>
 +
    <td>[[File:Ignition detection-2-2.png|65px]]</td>
 +
    <td>Ignition will be detected by vehicle power voltage between 13,2 – 30 V</td>
 +
  </tr>
 +
  <tr>
 +
    <td colspan="4">Device makes a record '''On Moving''' if one of these events happen:</td>
 +
  </tr>
 +
  <tr>
 +
    <td>[[File:300s_icon_2.png|65px]]</td>
 +
    <td>300 seconds passes</td>
 +
    <td>[[File:Angle_10_2.png|65px]]</td>
 +
    <td>Vehicle turns 10° degrees</td>
 +
  </tr>
 +
  <tr>
 +
    <td>[[File:Min_distance.png|65px]]</td>
 +
    <td>Vehicle drives 100 meters</td>
 +
    <td>[[File:Speed_delta.png|65px]]</td>
 +
    <td>Speed difference between last coordinate and current position is greater than 10 km/h</td>
 +
  </tr>
 +
  <tr>
 +
    <td colspan="4">Device makes a record '''On Stop''' if:</td>
 +
  </tr>
 +
  <tr>
 +
    <td>[[File:1h_icon.png|65px]]</td>
 +
    <td>1 hour passes while vehicle is stationary and ignition is off</td>
 +
  </tr>
 +
  <tr>
 +
    <td colspan="4">Records sending to server:</td>
 +
  </tr>
 +
  <tr>
 +
    <td>[[File:120_s.png|65px]]</td>
 +
    <td>If device has made a record it is sent to the server every 120 seconds</td>
 +
  </tr>
 +
</table>}}}
 +
 
 +
<br/>
 +
<p>After successful SMS configuration, {{{model|FMB1YX}}} device will '''synchronize time''' and '''update records''' to '''configured server'''. Time intervals and default I/O elements can be changed by using [[Teltonika Configurator]] or {{{SMS/GPRS Commands|[[Template:FMB Device Family Parameter list|SMS parameters]]}}}.</p>
 +
 
    
{{Template:Mounting_recommendations
 
{{Template:Mounting_recommendations
Line 87: Line 251:  
Device should be mounted with the sticker view to the open sky.
 
Device should be mounted with the sticker view to the open sky.
 
<br />
 
<br />
−
[[File:FMC234_07.png|center|400px]]
+
[[File:FMC230_07.png|center|400px]]
 
<br />
 
<br />
 
FMC234 device should be mounted with the device logo view to the open sky for the best device performance with not less than ¾ of metal free area. FMC234 has IP67 protection class. Top performance is reached if mounted outside of the vehicle.
 
FMC234 device should be mounted with the device logo view to the open sky for the best device performance with not less than ¾ of metal free area. FMC234 has IP67 protection class. Top performance is reached if mounted outside of the vehicle.
Line 109: Line 273:     
https://teltonika.lt/product/FMC234/
 
https://teltonika.lt/product/FMC234/
 +
 
[[Category:FMC234]]
 
[[Category:FMC234]]
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/93223"