Changes

}}

}}

== '''Battery placement after complete device disassemble''' ==

== '''Battery placement after complete device disassembling''' ==

[[File:Battery placement.png|left]]

[[File:Battery placement case.png|left|313x313px]]

[[File:Pcb placement.png|right|frameless]]

[[File:Pcb placement case.png|right|frameless|326x326px]]

<br />

<br />

<br />

<br />

# Using double sided tape, stick internal battery to the bottom part of the device case. Battery should be glued approximately 15 millimeters from the bottom wall of the case. ''Picture on the left''.

# Using double sided tape, stick internal battery to the bottom part of the device case. Battery should be glued approximately 15 millimeters from the bottom wall of the case. ''Picture on the left''.

# Connect battery to the PCB.

# Connect battery to the PCB.

# Place PCB into the bottom case by firstly inserting PCB part where antenna is located.

# Gently place PCB into the bottom case.

 

<br />

<br />

<br />

<br />

<br />

<br />

<br />

<br />

==<span style="color:#104996">'''2x6 socket pinout'''</span>==

==<span style="color:#104996">'''2x6 socket pinout'''</span>==