Changes

Line 27: Line 27:  
1. Power- up FTC881 with DC voltage (10-90V) power supply using power wires. LEDs should start blinking.
 
1. Power- up FTC881 with DC voltage (10-90V) power supply using power wires. LEDs should start blinking.
   −
2. Connect device to computer using Micro-USB cable and install USB driver, see “How to install USB drivers (Windows)1”
+
2. Connect device to computer using USB Type-C cable and install USB driver, see “How to install USB drivers (Windows)1”
 
      
=='''HOW TO INSTALL USB DRIVERS (WINDOWS)'''==
 
=='''HOW TO INSTALL USB DRIVERS (WINDOWS)'''==