Changes

no edit summary
Line 1: Line 1:  
[[image:VDO_Tacho_Cable_600x600_Shadow.png|400px|Image: 400 pixels]]
 
[[image:VDO_Tacho_Cable_600x600_Shadow.png|400px|Image: 400 pixels]]
   −
This functionality allows to download DDD files and read live data from tachograph front panel connection.
+
This functionality allows us to download DDD files and read live data from the tachograph front panel connection.
    
Only Siemens VDO Digital Tachographs – DTCO 1381 release 1.3a and higher are supported.
 
Only Siemens VDO Digital Tachographs – DTCO 1381 release 1.3a and higher are supported.
Line 7: Line 7:     
==Use Case==
 
==Use Case==
Compared to conventional tachograph connection to the back interface (C connector/D connector), front connection has these benefits:
+
Compared to conventional tachograph connection to the back interface (C connector/D connector), the front connection has these benefits:
    
*Main advantage is the <b>possibility to download DDD files from the 12 Volt tachographs </b>that do not support remote DDD files transfer through the C connector.
 
*Main advantage is the <b>possibility to download DDD files from the 12 Volt tachographs </b>that do not support remote DDD files transfer through the C connector.
Line 28: Line 28:     
*DDD files and live data via one cable. With Front Panel Interface you can get DDD files and live tachograph data. Note that during DDD files upload live data is not read.
 
*DDD files and live data via one cable. With Front Panel Interface you can get DDD files and live tachograph data. Note that during DDD files upload live data is not read.
This means that both FMB6 CAN can be used for a different purpose.
+
This means that both FMB6 CAN-BUS can be used for a different purpose.
    
*The DDD files transfer to WEB Tacho or Wialon stays the same - you can have a fleet of mixed connections, but use the same platform.
 
*The DDD files transfer to WEB Tacho or Wialon stays the same - you can have a fleet of mixed connections, but use the same platform.
Line 48: Line 48:  
[[image:Activation-with-card.png]]
 
[[image:Activation-with-card.png]]
   −
To enable Front Interface - insert DTCO® Update card into the card slot of the tachograph, the slot number is not important. The tachograph will update automatically.
+
To enable Front Interface - insert the DTCO® Update card into the card slot of the tachograph, the slot number is not important. The tachograph will update automatically.
   −
<b>NOTE:</b> if you use card with 5 activations - the tachograph will not show how many activations on the card is left, therefore you should note it manually.  
+
<b>NOTE:</b> if you use a card with 5 activations - the tachograph will not show how many activations on the card are left, therefore you should note it manually.  
 
<br>
 
<br>
 
===For 3.0-4.0 version===
 
===For 3.0-4.0 version===