Changes

m
no edit summary
Line 5: Line 5:  
===Operand On Exit===
 
===Operand On Exit===
 
Record is generated when input value leaves a range between low and high level limits.
 
Record is generated when input value leaves a range between low and high level limits.
[[Image:Fmb120_on_exit.png|x150px|center]]
+
[[Image:Fmb120_on_exit.png|x150px|none]]
    
===Operand On Entrance===
 
===Operand On Entrance===
 
----
 
----
 
Record is generated when input value enters a range between low and high level limits.
 
Record is generated when input value enters a range between low and high level limits.
[[Image:Fmb120_on_entrance.png|x150px|center]]
+
[[Image:Fmb120_on_entrance.png|x150px|none]]
    
===Operand On Both===
 
===Operand On Both===
 
----
 
----
 
Record is generated by both On Exit and On Entrance operands' logic at same time.
 
Record is generated by both On Exit and On Entrance operands' logic at same time.
[[Image:Fmb120_on_both.png|x150px|center]]
+
[[Image:Fmb120_on_both.png|x150px|none]]
    
===Operand Monitoring===
 
===Operand Monitoring===
 
----
 
----
 
No event at all. Values are recorded only when other triggers worked.
 
No event at all. Values are recorded only when other triggers worked.
[[Image:Fmb120_operand_monitoring.png|x150px|center]]
+
[[Image:Fmb120_operand_monitoring.png|x150px|none]]
    
===Operand On Hysteresis===
 
===Operand On Hysteresis===
 
----
 
----
 
Record is generated when input value crosses the high limit value from below the low limit value or vice versa.
 
Record is generated when input value crosses the high limit value from below the low limit value or vice versa.
[[Image:Fmb120_on_hysteresis.png|350px|center]]
+
[[Image:Fmb120_on_hysteresis.png|350px|none]]
    
===Operand On Change===
 
===Operand On Change===
 
----
 
----
 
Record is generated when input value changes.
 
Record is generated when input value changes.
[[Image:Fmb120_on_change.png|x150px|center]]
+
[[Image:Fmb120_on_change.png|x150px|none]]
    
===Operand On Delta Change===
 
===Operand On Delta Change===
 
----
 
----
 
Record is generated when input value changes and the absolute change becomes equal to or higher than the limit value.
 
Record is generated when input value changes and the absolute change becomes equal to or higher than the limit value.
[[Image:Fmb120_on_delta_change.png|x150px|center]]
+
[[Image:Fmb120_on_delta_change.png|x150px|none]]
    
==Avg Const==
 
==Avg Const==
 
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in Deep Sleep mode.<br/>Averaging follows RC exponential curves, see image below:
 
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in Deep Sleep mode.<br/>Averaging follows RC exponential curves, see image below:
[[Image:Fmb120_avg_const.png|300px|center]]
+
[[Image:Fmb120_avg_const.png|300px|none]]
 
?????For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.
 
?????For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.
 
{{{section_fmb0|
 
{{{section_fmb0|