Changes

m
no edit summary
Line 1: Line 1:  +
==Autoscan on init feature==
 +
'''Autoscan on init feature will only work with these conditions''':
 +
 +
·        Device has a program number 11120 or 11130;
 +
 +
·        Ignition source is '''DIN1''' or '''Power Voltage''';
 +
 +
·        Ignition must be '''ON''';
 +
 +
After device startup, autoscan will begin. It will scan for available program numbers with a timeout of 50 seconds. Autoscan feature will retry for 3 times in total. After that autoscan will be cancelled. If autoscan on init is successful it will take the first program number received and set it in internal CAN chip and device configuration. Thus, device will continue to work with that program number. The rest of program number list is not available and not displayed in configurator. Although, it can be received using sms command: ''lvcanproglist''.
 +
 +
 +
 
''Autoscan'' is a feature that automatically finds the best program number for your vehicle.
 
''Autoscan'' is a feature that automatically finds the best program number for your vehicle.
 
Here is a quick guide on how to use the ''Autoscan'' feature.
 
Here is a quick guide on how to use the ''Autoscan'' feature.
Line 25: Line 38:  
You can try entering each of the scanned numbers into device configuration to see which parameters are available and which suggestion works best for the vehicle.
 
You can try entering each of the scanned numbers into device configuration to see which parameters are available and which suggestion works best for the vehicle.
 
[[File:Scan1.jpg|center|frameless|1091x1091px]]<br />
 
[[File:Scan1.jpg|center|frameless|1091x1091px]]<br />
==Autoscan on init feature==
+
<br />
'''Autoscan on init feature will only work with these conditions''':
  −
 
  −
·        Device has a program number 11120 or 11130;
  −
 
  −
·        Ignition source is '''DIN1''' or '''Power Voltage''';
  −
 
  −
·        Ignition must be '''ON''';
  −
 
  −
After device startup, autoscan will begin. It will scan for available program numbers with a timeout of 50 seconds. Autoscan feature will retry for 3 times in total. After that autoscan will be cancelled. If autoscan on init is successful it will take the first program number received and set it in internal CAN chip and device configuration. Thus, device will continue to work with that program number. The rest of program number list is not available and not displayed in configurator. Although, it can be received using sms command: ''lvcanproglist''.