Changes

no edit summary
Line 15: Line 15:  
# After receiving a response to a command, repeat the learning procedure (first step).
 
# After receiving a response to a command, repeat the learning procedure (first step).
   −
'''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in [[FMB001 SMS/Call settings|SMS / Call settings]].
      +
{|
 +
|-
 +
| [[File:Alert.png|left|link=]] || <b>'''Note''': Before SMS text, two space symbols should be inserted if no SMS username or password was set in [[FMB001 SMS/Call settings|SMS / Call settings]].
 
After completed these steps, commands to open/close and to block/unblock engine can be performed.
 
After completed these steps, commands to open/close and to block/unblock engine can be performed.
 +
All SMS/GPRS responses should inform You that particular command has been completed successfully.</b>
 +
|}
   −
All SMS/GPRS responses should inform You that particular command has been completed successfully.
+
<bR>
 
+
{|
'''Note''': if installing CAN-CONTROL adapter into different vehicle - program should be changed according to the vehicle model and learning must be initiated ("first solution step"). If adapter will be installed again on the previous vehicle - program number needs to be restored and learning step must be repeated.
+
|-
 +
| [[File:Alert.png|left|link=]] || <b>'''Note''': if installing CAN-CONTROL adapter into different vehicle - program should be changed according to the vehicle model and learning must be initiated ("first solution step").  
 +
If adapter will be installed again on the previous vehicle - program number needs to be restored and learning step must be repeated.
 +
</b>
 +
|}