Changes

Line 80: Line 80:     
==== EYE Sensor Capturing Configuration ====
 
==== EYE Sensor Capturing Configuration ====
As an example on how to set Beacons Capturing Configuration parameters EYE Sensor can be used. Protocols used can be found here(link).
+
As an example on how to set Beacons Capturing Configuration parameters EYE Sensor can be used. Protocols used can be found [[EYE SENSOR / BTSMP1#Beacon and sensors data|here]](link).
 
[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]
 
[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]
 
[[File:Beacon temp marked.png|right|frameless|545x545px]]
 
[[File:Beacon temp marked.png|right|frameless|545x545px]]
Line 96: Line 96:     
* '''Name''' -  Eddystone and iBeacon were typed to name different sensors.
 
* '''Name''' -  Eddystone and iBeacon were typed to name different sensors.
*'''Manufacturer ID''' - is taken from protocol description, passing 9bytes and capturing UUID and Type. AAFE00, to comply Manufacturer ID size which is 4 bytes, 00 is added.
+
*'''Manufacturer ID''' - is taken from protocol description, which can be found [[EYE SENSOR / BTSMP1#Beacon and sensors data|here]]. UUID and Type value is AAFE00 for Eddystone. CompanyID and Beacon Type are used for iBeacon  which is 4C000215.
*'''Manufacturer ID Offset''' - number used to indicate when Manufacturer ID starts in advertising packet.
+
*'''Manufacturer ID Offset''' - passes 9bytes in advertising packet to indicate when Manufacturer ID starts. 5bytes for iBeacon.
*'''Manufacturer ID Size''' - number which indicates length of Manufacturer ID.
+
*'''Manufacturer ID Size''' - number which indicates size of Manufacturer ID. 3bytes for Eddystone 4bytes for iBeacon.
 
*'''Beacon ID Offset''' - number used to indicate when Beacon ID starts in advertising packet.
 
*'''Beacon ID Offset''' - number used to indicate when Beacon ID starts in advertising packet.
*'''Beacon ID Size''' - number which indicates length of Beacon ID size, Instance ID is set in Eddystone and whole ID in iBeacon.
+
*'''Beacon ID Size''' - number which indicates length of Beacon ID size. E.g. Instance ID is set in Eddystone and whole ID(UUID, Major, Minor) in iBeacon.
 
*'''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. Temperature.  
 
*'''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. Temperature.  
 
*'''Beacon ID Source'''- configured ID output is shown in pictures. MAC address can be used as Source ID as well, in this case, It would be showed in ID section.
 
*'''Beacon ID Source'''- configured ID output is shown in pictures. MAC address can be used as Source ID as well, in this case, It would be showed in ID section.