Changes

no edit summary
Line 1: Line 1:  
__TOC__
 
__TOC__
===Configuring Blue Puck/Coin/Slim Beacon===
+
[[File:EYE device.png|center|frameless|800x800px|EYE Beacon BTSID]]
[[Image:Screen beacon.png|right|frame]]
  −
Bluetooth LE Blue Puck, Blue Coin and Blue Slim beacons are disabled by default. <br>Configurations to these beacons are written through NFC.<br>
  −
To do this download <b>[https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile]</b> by Ela from <i>Google Play Store</i> to your Android-powered device.<br>
  −
<b>Note!</b> Android-powered device that is used for configuring Blue Puck/Coin sensors must support NFC read/write functionality.<br><br>
     −
Follow these instructions to easily configure Blue Puck/Coin/Slim Bluetooth LE Beacon:
+
== Eye Devices ready to use ==
 +
The easiest way to use the Teltonika's Eye Devices is as fast as unbox them.
   −
*Enable <code>Bluetooth</code> and <code>NFC</code> on your Android-powered device.
+
[[EYE BEACON / BTSID1|Eye Beacons]] are designed to make your wireless experience much more easy than ever because there is not need to make a previous configuration, the device has a pre-charged config from factory, this ensures a good operation.
*Launch <b>Device Manager Mobile</b> on your Android-powered device.
  −
*Select <i>Configuration.</i>
  −
*Place your Android-powered device on top of Blue Puck/Coin/Slim Beacon to scan it.
  −
*Click <i>Enable</i> to allow Blue Puck/Coin/Slim Beacon transmit advertising data.
  −
*We recommend to set <i>Power</i> to 4 to get the best possible distance.
  −
*Set ''TAG Format'' to iBeacon.
  −
*Set ''BLE Emit Period'' to 1 second to get the best possible sensor detection.
  −
*Click <i>Write</i> button.
  −
*Place your Android-powered device on top of Blue Puck/Coin/Slim sensor to write configuration to it.
     −
Once the configuration is written successfully, the Blue Puck/Coin/Slim Beacon will be enabled and use the settings configured in the APP.<br>
+
==Beacon Configuration and data sending==
<b>Note!</b> Make sure that <i>Manufacturer data mode</i> is Disabled, otherwise BLE Beacon will not be detected without additional changes in configuration.
  −
 
  −
==Beacon Configuration and data sending==  
  −
<br>
   
===Beacon configuration===
 
===Beacon configuration===