Changes

*[https://wiki.teltonika-gps.com/wikibase/images/4/4e/FMBXX_TLSDTLS_encryption_configuration_v0.3.pdf TLS/DTLS prepare guide]<br />

*[https://wiki.teltonika-gps.com/wikibase/images/4/4e/FMBXX_TLSDTLS_encryption_configuration_v0.3.pdf TLS/DTLS prepare guide]<br />

==Installation==

==Installation==

[[File:Example Inst.jpg|thumb|Instalation|alt=|379x379px]]

[[File:Example Inst.jpg|thumb|Instalation|alt=|260x260px]]

For gain access to ability change default security state (for device from the factory) you need power up device (10-30V) and connect via USB to the PC. After device will be powered and LED indicators start work you can access to settings.

For gain access to ability change default security state (for device from the factory) you need power up device (10-30V) and connect via USB to the PC. After device will be powered and LED indicators start work you can access to settings.

====2.1. Set up Keyword:====

====2.1. Set up Keyword:====

[[File:Keyword use.gif|thumb|379x379px|alt=|Set up keyword]]

[[File:Sey up keyword.gif|alt=|thumb|365x365px|Set up keyword]]

This command will emove existing keyword. If device is locked, keyword cannot be changed.   

This command will emove existing keyword. If device is locked, keyword cannot be changed.   

Phone numbers have to be written in international standard, using "+" is optional but not necessary (in both cases number will be recognized, but when number is without "+" symbol, IDD Prefix will not be generated, which depends on location of the phone). If no numbers are entered, configuration and sending commands over SMS are allowed from all GSM numbers.

Phone numbers have to be written in international standard, using "+" is optional but not necessary (in both cases number will be recognized, but when number is without "+" symbol, IDD Prefix will not be generated, which depends on location of the phone). If no numbers are entered, configuration and sending commands over SMS are allowed from all GSM numbers.

If a key is present the outgoing data will be ciphered by the configured key and incoming data will be deciphered. The '''AES128 key''' must be in '''HEX format with a length of 16 bytes'''. As an example 11223344556677889900AABBCCDDEEFF is used.

If a key is present the outgoing data will be ciphered by the configured key and incoming data will be deciphered. The '''AES128 key''' must be in '''HEX format with a length of 16 bytes'''. As an example 11223344556677889900AABBCCDDEEFF is used.

[[Category: Usage scenarios]]

[[Category: Usage scenarios]]