Changes

==Beacon List Settings before FW ver. 3.27.07.Rev.00==  

==Beacon List Settings before FW ver. 3.27.07.Rev.00==  

This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>

This page is dedicated for explanation of Bluetooth® settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>

===Beacon Settings===

===Beacon Settings===

'''Beacon Record'''<br>

'''Beacon Record'''<br>

* '''''Eventual''''' – Record is sent after scan procedure is completed. This parameter depends from the [[{{{model|FMB120}}} Bluetooth 4.0 settings|'''Bluetooth 4.0 Scan Settings'''.]]<br>

* '''''Eventual''''' – Record is sent after scan procedure is completed. This parameter depends from the [[{{{model|FMB120}}} Bluetooth® 4.0 settings|'''Bluetooth® 4.0 Scan Settings'''.]]<br>

* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>

* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>

Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br/>

Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br/>

There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.

There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.

==Beacon List Settings after FW ver. 3.27.07.Rev.00==

==Beacon List Settings after FW ver. 3.27.07.Rev.00==

This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].

This page is dedicated for explanation of Bluetooth® settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].

===Beacon Settings===

===Beacon Settings===

[[File:NewBeaconSettings.png]]

[[File:NewBeaconSettings.png]]

[[File:Protocol_break_down.PNG|center|frameless|1200x800px]]

[[File:Protocol_break_down.PNG|center|frameless|1200x800px]]

<br></br>

<br></br>

'''Parsing additional data for iBeacon and EddyStone:'''

==== Parsing additional data for iBeacon and EddyStone: ====

<br></br>

<br></br>

==== EYE Sensor Capturing Configuration ====

==== EYE Sensor Capturing Configuration ====

As an example on how to set Beacons Capturing Configuration parameters EYE Sensor can be used. Protocols used can be found [[EYE SENSOR / BTSMP1|here]].

As an example on how to set Beacons Capturing Configuration parameters EYE Sensor can be used. Protocols used can be found [[EYE SENSOR / BTSMP1|here]].

[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]

[[File:Beacons Capturing Configuration set.png|frameless|1143x1143px|Parameter values]]

[[File:Beacon temp marked.png|right|frameless|545x545px]]

[[File:Beacon temp marked.png|right|frameless|545x545px]]

Information shown after setting the parameters. Red rectangle indicates configured EYE sensors.  

Information shown after setting the parameters. Red rectangle indicates configured EYE sensors.