Difference between revisions of "Template:FM36YX GSM settings, GPRS part"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "GPRS defines main parameters for FM3612: GSM operator APN and GPRS username and password (optional – depending on operator), destination server IP and port, and allows to se...")
 
m
Line 1: Line 1:
GPRS defines main parameters for FM3612: GSM operator APN and GPRS username and
+
GPRS defines main parameters for {{{model|FM36YX}}}: GSM operator APN and GPRS username and password (optional – depending on operator), destination server IP and port, and allows to set protocol used for data transfers – TCP or UDP.
password (optional – depending on operator), destination server IP and port, and allows to set
 
protocol used for data transfers – TCP or UDP.
 
Yet user can choose if device will work only in GSM network, or it will prefer 3G network
 
and switch to GSM only then 3G is absent.
 
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these
 
is used, APN should be entered as ‘chap:<APN>’ or ‘pap:<APN>’. I.e. if operator is using APN
 
‘internet’ with CHAP authentication, it should be entered as ‘chap:internet’. Information
 
about APN and authentication type should be provided by your GSM operator
 
 
<br>
 
<br>
'''Figure 23 GPRS_configuration'''
+
Yet user can choose if device will work only in GSM network, or it will prefer 3G network and switch to GSM only then 3G is absent.
[[Image:GPRS_configuration.pgn]]
+
<br>
 +
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these is used, APN should be entered as ‘chap:<APN>’ or ‘pap:<APN>’. I.e. if operator is using APN ‘internet’ with CHAP authentication, it should be entered as ‘chap:internet’. Information about APN and authentication type should be provided by your GSM operator.
 +
<br>
 +
[[Image:FM36YX_GPRS_configuration.pgn]]

Revision as of 13:47, 31 May 2018

GPRS defines main parameters for FM36YX: GSM operator APN and GPRS username and password (optional – depending on operator), destination server IP and port, and allows to set protocol used for data transfers – TCP or UDP.
Yet user can choose if device will work only in GSM network, or it will prefer 3G network and switch to GSM only then 3G is absent.
Some operators use specific authentication for GPRS session – CHAP or PAP. If any of these is used, APN should be entered as ‘chap:<APN>’ or ‘pap:<APN>’. I.e. if operator is using APN ‘internet’ with CHAP authentication, it should be entered as ‘chap:internet’. Information about APN and authentication type should be provided by your GSM operator.
File:FM36YX GPRS configuration.pgn