3,229
edits
Changes
Template:FM36YX Scenarios settings (view source)
Revision as of 07:07, 7 October 2019
, 07:07, 7 October 2019no edit summary
* [[{{{model|FM36YX}}}_Features_settings#Authorized_driving|Authorized driving]]
* [[{{{model|FM36YX}}}_Features_settings#Authorized_driving|Authorized driving]]
* [[{{{model|FM36YX}}}_Features_settings#Immobilizer|Immobilizer]]
* [[{{{model|FM36YX}}}_Features_settings#Immobilizer|Immobilizer]]
* [[{{{model|FM36YX}}}_Features_settings#Ignition_On_Counter|Ignition On Counter]]
<br><br>
<br><br>
===Green Driving===
===Green Driving===
----
----
Helps to prevent and inspect driver about harsh driving. Scenario continuously monitors: accelerating force, braking force and cornering angles. Warns driver if needed. DOUT1 or DOUT2 is controlled by scenario for user needs, for example buzzer or LED. <br>
Helps to prevent and inspect driver about harsh driving. Scenario continuously monitors: accelerating force, braking force and cornering angles. Warns driver if needed. DOUT1 or DOUT2 is controlled by scenario for user needs, for example buzzer or LED. <br>
To save 3G/GPRS traffic Green Driving '''event''' will be '''generated (included into sent records) only''' when measured values are higher than those set in configuration, without additional I/O settings.<br>
To save 3G(in FM36M1 4G)/GPRS traffic Green Driving '''event''' will be '''generated (included into sent records) only''' when measured values are higher than those set in configuration, without additional I/O settings.<br>
To prevent generating false events, harsh acceleration and harsh braking is monitored only when following conditions are fulfilled:
To prevent generating false events, harsh acceleration and harsh braking is monitored only when following conditions are fulfilled:
* Ignition is ON (DIN1 = 1)
* Ignition is ON (DIN1 = 1)
'''Digital output control:'''<br>
'''Digital output control:'''<br>
DOUTX (selected digital output) is continuously OFF. DOUTX turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUTX turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.<br><br>
DOUTX (selected digital output) is continuously OFF. DOUTX turns ON if Ignition turns ON (configured Ignition Source = 1). After iButton ID is read (any iButton is attached), DOUTX turns OFF. After iButton identification, ignition can be turned OFF (configured Ignition Source = 0) for no longer than 30 seconds, otherwise immobilizer must be repeated.<br><br>
===Ignition On Counter===
'''Ignition On Counter''' calculates how long Ignition was turned ON. The scenario depends on the configured Ignition source. The scenario is enabled it will count Ignition ON (logic 1) time (in seconds). After ignition OFF and ON again Horometer value will continue counting (from the last
value). After the device restart, '''Ignition On Counter''' value is not restarted.