Template:FM36 SMS Command List
From Wiki Knowledge Base | Teltonika GPS
Revision as of 11:21, 1 June 2018 by Simkunas.ma (talk | contribs)
All commands are case sensitive. While FM36YX operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to FM36YX device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter). FM36YX will receive the SMS when it wakes up (exits deep sleep mode).
| Command | Description | Response |
|---|---|---|
| getstatus | Modem Status information | Yes |
| getweektime | Current device time, Day of Week and amount of minutes passed since start of week | Yes |
| getops | List of currently available GSM operator | Yes |
| getcfgtime | Date and Time of last successful configuration | Yes |
| ggps | Google Map Link information | Yes |
| getgps | Current GPS data and time | Yes |
| cpureset | Reset CPU | No |
| resetprof | Reset all FLASH1 profile configuration to default profile | No |
| getver | Device / Modem / Code version information | Yes |
| getinfo | Device runtime system information | Yes |
| deleterecords | Delete all records saved on FLASH | No |
| getio | Readout digital inputs and outputs | Yes |
| readio # | Readout digital input value according entered ID, # - ID value | Yes |
| setdigout ## Y1 Y2 | set digital outputs 0 – OFF, 1 – ON Y1 – timeout for DO1 Y2 – timeout for DO2 |
Yes |
| getparam # | Readout parameter value according entered ID. # - ID value. |
Yes |
| setparam # # | Set parameter value according entered ID and Value. 1.# - ID value. 2.# - New Parameter Value |
Yes |
| getparam 1271 X | X values can be 1, 2, 3 | Yes |
| flush #,#,#,#,#,#,# | Initiates all data sending to specified target server 1.# - IMEI 2.# - APN 3.# - LOGIN 4.# - PASS 5.# - IP 6.# - PORT 7.# - MODE (0-TCP/1-UDP) |
No |
| readops # | 1 – send first 20 operator codes, 2 – send from 21st to 40th operator codes, 3 – send all other operator codes | |
| sn # | Static navigation, 1 – enable, 0 – disable | Yes |
| banlist | Banned operators information | Yes |
| crashlog | Device last information before unexpected reset | Yes |
| delete_all_sms | Deletes all SMS | No |
| lvcangetprog | CAN Program Number request by SMS | Yes |
| lvcansetprog # | Set LVCAN program number | Yes |
| lvcangetinfo | Get LV-CAN info by SMS | Yes |
| Response details | Description |
|---|---|
| Data Link | Indicate module connection to server at the moment: 0 – Not connected, 1 – connected |
| GPRS | Indicate if GPRS is available at the moment |
| Phone | Voice Call status: 0 – ready, 1 – unavailable, 2 – unknown, 3 – ringing, 4 – call in progress, 5 – asleep |
| SIM | SIM Status: 0 – ready, 1 – pin, 2 – puk, 3 – pin2, 4 – puk2 |
| OP | Connected to GSM Operator: numerical id of operator |
| Signal | GSM Signal Quality [0-5] |
| NewSMS | Indicate if new message received |
| Roaming | 0 – Home Network, 1 – roaming |
| SMSFull | SMS storage is full? 0 – ok, 1 – SMS storage full |
| LAC | GSM Tower Location Area Code |
| Cell ID | GSM Tower Cell ID Code |
