Template:FM36 SMS Command List

From Wiki Knowledge Base | Teltonika GPS

All commands are case sensitive. While FM36YX operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to FM36YX device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter). FM36YX will receive the SMS when it wakes up (exits deep sleep mode).

Command Description Response
getstatus Modem Status information Yes
getweektime Current device time, Day of Week and amount of minutes passed since start of week Yes
getops List of currently available GSM operator Yes
getcfgtime Date and Time of last successful configuration Yes
ggps Google Map Link information Yes
getgps Current GPS data and time Yes
cpureset Reset CPU No
resetprof Reset all FLASH1 profile configuration to default profile No
getver Device / Modem / Code version information Yes
getinfo Device runtime system information Yes
deleterecords Delete all records saved on FLASH No
getio Readout digital inputs and outputs Yes
readio # Readout digital input value according entered ID, # - ID value Yes
setdigout ## Y1 Y2 set digital outputs
0 – OFF, 1 – ON
Y1 – timeout for DO1
Y2 – timeout for DO2
Yes
getparam # Readout parameter value according entered ID.
# - ID value.
Yes
setparam # # Set parameter value according entered ID and Value.
1.# - ID value.
2.# - New Parameter Value
Yes
getparam 1271 X X values can be 1, 2, 3 Yes
flush #,#,#,#,#,#,# Initiates all data sending to specified target server
1.# - IMEI
2.# - APN
3.# - LOGIN
4.# - PASS
5.# - IP
6.# - PORT
7.# - MODE (0-TCP/1-UDP)
No
readops # 1 – send first 20 operator codes, 2 – send from 21st to 40th operator codes, 3 – send all other operator codes
sn # Static navigation, 1 – enable, 0 – disable Yes
banlist Banned operators information Yes
crashlog Device last information before unexpected reset Yes
delete_all_sms Deletes all SMS No
lvcangetprog CAN Program Number request by SMS Yes
lvcansetprog # Set LVCAN program number Yes
lvcangetinfo Get LV-CAN info by SMS Yes

getstatus

Response details Description
Data Link Indicate module connection to server at the moment: 0 – Not connected, 1 – connected
GPRS Indicate if GPRS is available at the moment
Phone Voice Call status: 0 – ready, 1 – unavailable, 2 – unknown, 3 – ringing, 4 – call in progress, 5 – asleep
SIM SIM Status: 0 – ready, 1 – pin, 2 – puk, 3 – pin2, 4 – puk2
OP Connected to GSM Operator: numerical id of operator
Signal GSM Signal Quality [0-5]
NewSMS Indicate if new message received
Roaming 0 – Home Network, 1 – roaming
SMSFull SMS storage is full? 0 – ok, 1 – SMS storage full
LAC GSM Tower Location Area Code
Cell ID GSM Tower Cell ID Code
 Example: Data Link: 0 GPRS: 1 Phone: 0 SIM: 0 OP: 24602 Signal: 5 NewSMS: 0 Roaming: 0 SMSFull: 0 LAC: 1 Cell ID: 864

getweektime

Response details Description
Clock Sync Indicates system clock synchronization status. 0 – System is not synchronized, 1 – System synchronized
DOW Day Of Week – indicates current day of week starting from 1 – Monday, 2 – Tuesday, etc.
Time Indicates current GMT time
WeekTime Indicates time in minutes starting from Monday 00:00 GMT