Changes

m
no edit summary
Line 3: Line 3:  
==GPS Sleep mode==
 
==GPS Sleep mode==
 
{{{model|FM36YX}}} is able to go to GPS sleep mode if such mode is enabled.<br/> Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, device goes to sleep mode. While in GPS sleep mode, {{{model|FM36YX}}} sets GNSS receiver to sleep mode and it isn’t making periodic records (only event records is being recorded with last known coordinate and sent to AVL server). As a result power usage decreases allowing saving vehicle battery.
 
{{{model|FM36YX}}} is able to go to GPS sleep mode if such mode is enabled.<br/> Sleep mode timeout starts counting when device is in STOP mode. After timeout is reached and all conditions for GPS sleep mode are met, device goes to sleep mode. While in GPS sleep mode, {{{model|FM36YX}}} sets GNSS receiver to sleep mode and it isn’t making periodic records (only event records is being recorded with last known coordinate and sent to AVL server). As a result power usage decreases allowing saving vehicle battery.
<br/>{{{model|FM36YX}}} will enter GPS sleep mode if ALL of these conditions are met:
+
<br/>{{{model|FM36YX}}} will enter GPS sleep mode if '''ALL''' of these conditions are met:
    
* {{{model|FM36YX}}} has to be configured to work in GPS Sleep mode and sleep timeout is reached;
 
* {{{model|FM36YX}}} has to be configured to work in GPS Sleep mode and sleep timeout is reached;
Line 9: Line 9:  
* No movement by configured movement source or movement sensor is detected;
 
* No movement by configured movement source or movement sensor is detected;
 
* Ignition (configured ignition source) is off;
 
* Ignition (configured ignition source) is off;
* Forced wakeup is not set;
+
{{{nzn|* Forced wakeup is not set;
* There are no SMS messages being received.
+
* There are no SMS messages being received.}}}
   −
{{{model|FM36YX}}} exits GPS sleep mode if ONE of following conditions is true:
+
{{{model|FM36YX}}} exits GPS sleep mode if '''ONE''' of following conditions is true:
 
* Movement by movement source or movement sensor is detected;
 
* Movement by movement source or movement sensor is detected;
 
* Ignition (configured ignition source) is turned on.
 
* Ignition (configured ignition source) is turned on.
Line 28: Line 28:  
* USB cable is not connected.
 
* USB cable is not connected.
   −
{{{model|FM36YX}}} exits deep sleep mode if ONE of the following conditions is true:
+
{{{model|FM36YX}}} exits deep sleep mode if '''ONE''' of the following conditions is true:
 
* Movement by accelerometer or configured movement source is detected;
 
* Movement by accelerometer or configured movement source is detected;
 
* Ignition (configured ignition source) is turned on.
 
* Ignition (configured ignition source) is turned on.
 
* USB cable is connected;
 
* USB cable is connected;