Difference between revisions of "Template:FM36 System Settings"
From Wiki Knowledge Base | Teltonika GPS
Simkunas.ma (talk | contribs) |
Simkunas.ma (talk | contribs) |
||
| Line 1: | Line 1: | ||
System settings have 7 configurable parameters: | System settings have 7 configurable parameters: | ||
*Sleep settings, where user can turn GPS sleep/deep sleep on or off; | *Sleep settings, where user can turn GPS sleep/deep sleep on or off; | ||
| − | *Analog Input Settings, where user can choose analog input range 10 V or 30 V, | + | *Analog Input Settings, where user can choose analog input range 10 V or 30 V, depending on needed accuracy (lower range gives higher accuracy of measurements), and input voltage; |
| − | depending on needed accuracy (lower range gives higher accuracy of | + | *Object Motion Detection Settings, where user can configure 3 ways how {{{model|FM36YX}}} will detect stopped movement, and change its working mode; |
| − | measurements), and input voltage; | ||
| − | *Object Motion Detection Settings, where user can configure 3 ways how {{{model|FM36YX}}} | ||
| − | will detect stopped movement, and change its working mode | ||
| − | |||
*Static navigation settings, where user can turn static navigation on or off; | *Static navigation settings, where user can turn static navigation on or off; | ||
| − | *Records Settings, where user can enable or disable records when GPS is not | + | *Records Settings, where user can enable or disable records when GPS is not available (no time synchronization); |
| − | available (no time synchronization); | + | *GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time (if after timeout there will not be synchronized time, it will be synchronized via NTP server); |
| − | *GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time | ||
| − | (if after timeout there will not be synchronized time, it will be synchronized via NTP | ||
| − | server) | ||
*Ignition Source sets ignition triggered functionalities to be triggered by: | *Ignition Source sets ignition triggered functionalities to be triggered by: | ||
| − | **Power Voltage (if voltage is between High Voltage Level and Low Voltage | + | **Power Voltage (if voltage is between High Voltage Level and Low Voltage Level the ignition is considered to be turned on); |
| − | Level the ignition is considered to be turned on); | ||
**Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off); | **Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off); | ||
| − | ** | + | **Movement (if accelerometer/movement sensor detects movement then ignition is on, if movement stops – ignition is off). |
| − | ignition is on, if movement stops – ignition is off). | ||
Revision as of 13:16, 31 May 2018
System settings have 7 configurable parameters:
- Sleep settings, where user can turn GPS sleep/deep sleep on or off;
- Analog Input Settings, where user can choose analog input range 10 V or 30 V, depending on needed accuracy (lower range gives higher accuracy of measurements), and input voltage;
- Object Motion Detection Settings, where user can configure 3 ways how FM36YX will detect stopped movement, and change its working mode;
- Static navigation settings, where user can turn static navigation on or off;
- Records Settings, where user can enable or disable records when GPS is not available (no time synchronization);
- GNSS Settings, where user can choose satellite system and GNSS FIX Timeout Time (if after timeout there will not be synchronized time, it will be synchronized via NTP server);
- Ignition Source sets ignition triggered functionalities to be triggered by:
- Power Voltage (if voltage is between High Voltage Level and Low Voltage Level the ignition is considered to be turned on);
- Digital Input (DIN1 ON – ignition on, DIN1 OFF – ignition off);
- Movement (if accelerometer/movement sensor detects movement then ignition is on, if movement stops – ignition is off).
