Changes

==Purpose of CAN adapters LV-CAN200 and ALL-CAN300==

==Purpose of CAN adapters LV-CAN200 and ALL-CAN300==

[[Image:Fma110_can_connx_.png|350px|none]]

[[Image:FMA110.png|350px|none]]

LV-CAN200 is used to read data from light vehicles, while ALL-CAN300 is used to read data from any type of transport: light vehicles, trucks, buses, agriculture transport and other special transport. Using these adapters {{{model|FMB1YX}}} device is able to collect and send vehicle data.

LV-CAN200 is used to read data from light vehicles, while ALL-CAN300 is used to read data from any type of transport: light vehicles, trucks, buses, agriculture transport and other special transport. Using these adapters {{{model|FMB1YX}}} device is able to collect and send vehicle data.

1. In car, connect LV-CAN200 or ALL-CAN300 to CAN bus and to the {{{model|FMB1YX}}} device , wait 10 seconds. Note, that car engine must be started.<br/>

1. In car, connect LV-CAN200 or ALL-CAN300 to CAN bus and to the {{{model|FMB1YX}}} device , wait 10 seconds. Note, that car engine must be started.<br/>

2. Disconnect LV-CAN200 or ALL-CAN300 from {{{model|FMB1YX}}} , and connect PC USB cable to {{{model|FMB1YX}}} Device. It is very important not to disconnect {{{model|FMB1YX}}} from power source, because then all CAN data will be lost.

2. Disconnect LV-CAN200 or ALL-CAN300 from {{{model|FMB1YX}}} , and connect PC USB cable to {{{model|FMB1YX}}} Device. It is very important not to disconnect {{{model|FMB1YX}}} from power source, because then all CAN data will be lost.

[[Image:Fma_LVCAN_Connection.png|400px|center]]

[[Image:Fma1_LVCAN_Connection.png|400px|center]]

CAN bus data which can be read from your car is shown in “Light or ALL Vehicles Can adapter supported cars” document. <br/>  

CAN bus data which can be read from your car is shown in “Light or ALL Vehicles Can adapter supported cars” document. <br/>