0
edits
Changes
Template:FMA1 Trip and Odometer settings (view source)
Revision as of 13:33, 6 September 2018
, 13:33, 6 September 2018→Trip
<br><br>
<br><br>
[[File:FM36YX_Continuous_distance.png]]<br><br>
[[File:FM36YX_Continuous_distance.png]]<br><br>
Continuous odometer calculates the distance if Total Distance I/O element is enabled. Odometer Value is constantly saved to flash memory every 30 seconds, but counted every second. After power is turned off, odometer value saved in flash does not reset. Start odometer value with can be set using configurator („set“ button) or SMS/GPRS (setparam/getparam) commands. This parameter can not be configured via TCP config. If this value is not set, FMA110 starts counting from 0. Continuous odometer works irrespective of the Trip functionality.
Continuous odometer calculates the distance if Total Distance I/O element is enabled. Odometer Value is constantly saved to flash memory every 30 seconds, but counted every second. After power is turned off, odometer value saved in flash does not reset. Start odometer value with can be set using configurator („set“ button) or SMS/GPRS (setparam/getparam) commands. This parameter can not be configured via TCP config. If this value is not set, {{{model|FM36YX}}} starts counting from 0. Continuous odometer works irrespective of the Trip functionality.
