Template:FMB0 First start card
From Wiki Knowledge Base | Teltonika GPS
Revision as of 15:27, 24 October 2018 by Mantas.gadliauskas (talk | contribs)
GNSS/GSM/Blue-tooth tracker with GNSS/GSM antennas and internal battery
How to insert micro SIM card and connect battery
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
- Attach device cover back.
Device is ready to be connected.
How to insert SD card into FMB1YX
Insert SD card as shown.
NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.
