Difference between revisions of "Template:FMB1 First start card"
From Wiki Knowledge Base | Teltonika GPS
Line 11: | Line 11: | ||
# Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides. | # Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides. | ||
− | # Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}} | + | # Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}} |
# Attach device '''cover''' back. | # Attach device '''cover''' back. | ||
# Device is ready to be connected. | # Device is ready to be connected. |
Revision as of 17:56, 29 October 2018
GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas
How to insert Micro-SIM card
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Attach device cover back.
- Device is ready to be connected.
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.