Difference between revisions of "Template:FMB1 First start card"
From Wiki Knowledge Base | Teltonika GPS
| Line 10: | Line 10: | ||
=='''How to insert {{{sim_type|Micro-}}}SIM card'''== | =='''How to insert {{{sim_type|Micro-}}}SIM card'''== | ||
| − | + | # Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides. | |
| + | # Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.}}} | ||
| + | # Attach device '''cover''' back. | ||
| + | # Device is ready to be connected. | ||
| − | + | [[Image:Fmb120_cover_1.png|280px]][[Image:Fmb120_cover_2.png|280px]][[Image:Fmb120_cover_3.png|280px]][[Image:Fmb120_cover_4.png|280px]] | |
| − | |||
| − | + | {| | |
| − | + | |- | |
| − | [[ | + | | [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b> |
| − | + | |} | |
| − | < | ||
{{{microsd_insert| | {{{microsd_insert| | ||
=='''How to insert microSD card'''== | =='''How to insert microSD card'''== | ||
| − | + | # Push microSD card lock case. | |
| − | + | # Open microSD card locker. | |
| − | + | # Correctly insert microSD card into slot. | |
| − | + | # Close microSD card locker. | |
| − | + | # Push microSD card lock case to locked position. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]] | [[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]] | ||
}}} | }}} | ||
Revision as of 11:06, 25 October 2018
GNSS/GSM/Blue-tooth tracker with GNSS/GSM antennas and internal battery
How to insert Micro-SIM card
- Gently remove FMB1YX cover using plastic pry tool from both sides.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Attach device cover back.
- Device is ready to be connected.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
