Difference between revisions of "Template:FMB1 First start card withoutSD"

From Wiki Knowledge Base | Teltonika GPS
Line 12: Line 12:
 
=='''How to insert {{{sim_type|Micro-}}}SIM card'''==
 
=='''How to insert {{{sim_type|Micro-}}}SIM card'''==
  
−
#Gently remove {{{model|FMX2YX}}} '''cover''' using '''plastic pry tool''' from both sides.
+
#Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
−
#Disassemble the device, remove both sides from the PCB
 
 
#Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
 
#Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
−
#Connect the battery
 
−
#Place the battery in the housing
 
 
#Attach device '''cover''' back.
 
#Attach device '''cover''' back.
 +
#Device is ready to be connected.
  
−
 
+
[[Image:FMB1_cover1_correct.png|280px]][[Image:FMB1_cover2_correct.png|280px]][[Image:FMB1_cover3_correct.png|280px]][[Image:FMB1_cover4_correct.png|280px]]
−
[[Image:FMX2YX_cover_open1_correct.png|280px]][[Image:FMX2YX_cover2_correct.png|280px]][[Image:FMX2YX_cover3_correct.png|280px]][[Image:FMX2YX_cover4_correct.png|280px]][[Image:FMX2YX_cover5_correct.png|middle|280px]][[Image:FMX2YX_cover6_correct.png|middle|280px]]
 
  
 
{|
 
{|

Revision as of 14:56, 25 June 2020

Qsg rut950 teltonika.PNG


GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas

Fmb120 man.png



How to insert Micro-SIM card

  1. Gently remove FMB1YX cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  3. Attach device cover back.
  4. Device is ready to be connected.

FMB1 cover1 correct.pngFMB1 cover2 correct.pngFMB1 cover3 correct.pngFMB1 cover4 correct.png

Alert.png
 Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB1_First_start_card_withoutSD&oldid=58680"