Template:FMB1 First start card withoutSD


(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Qsg rut950 teltonika.PNG


GNSS/GSM/Blue-tooth tracker with internal GNSS/GSM antennas

Fmb120 man.png



How to insert Micro-SIM card

  1. Gently remove FMX2YX cover using plastic pry tool from both sides.
  2. Disassemble the device, remove both sides from the PCB
  3. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
  4. Connect the battery
  5. Place the battery in the housing
  6. Attach device cover back.


FMX2YX cover open1 correct.pngFMX2YX cover2 correct.pngFMX2YX cover3 correct.pngFMX2YX cover4 correct.pngFMX2YX cover5 correct.pngFMX2YX cover6 correct.png

Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.