406
edits
Changes
Template:FMB208 System settings (view source)
Revision as of 13:18, 30 January 2020
, 13:18, 30 January 2020no edit summary
* using 03.25.14 or newer firmware<br>
* using 03.25.14 or newer firmware<br>
}}}
}}}
[[image:FMB208 System screen.jpg|center]]
[[image:Timesyncflowchart.png|center]]
=== Accelerometer Auto Calibration ===
=== Accelerometer Auto Calibration ===
[[File:Accelerometer auto calibration.PNG|thumb|right]]
[[File:Accelerometer_auto_calibration.PNG|thumb|right]]
<br>
<br>
User can disable or enable Accelerometer Auto Calibration and Gravity Filter features. This Feature is available from firmware version 03.25.07.Rev.00. Under Accelerometer Auto Calibration settings, user can choose:
User can disable or enable Accelerometer Auto Calibration and Gravity Filter features. This Feature is available from firmware version 03.25.07.Rev.00. Under Accelerometer Auto Calibration settings, user can choose:
''Static Navigation'' mode is a filter, which filters out track jumps when the object is stationary. If static navigation filter is disabled, it will apply no changes to GPS data. If static navigation filter is enabled, it will filter changes in GPS position if no movement (as defined by configured movement source) or ignition (as defined by configured ignition source) is detected. It allows filtering GPS jumps when the object is parked (not moving) and GPS position is still traced.
''Static Navigation'' mode is a filter, which filters out track jumps when the object is stationary. If static navigation filter is disabled, it will apply no changes to GPS data. If static navigation filter is enabled, it will filter changes in GPS position if no movement (as defined by configured movement source) or ignition (as defined by configured ignition source) is detected. It allows filtering GPS jumps when the object is parked (not moving) and GPS position is still traced.
{{{txt_mod_img|
{{{txt_mod_img|
[[Image:FMB System settings.PNG|800px|none]]
[[Image:FMB208 System screen.jpg|800px|none]]
}}}
}}}
In ''GNSS Source'' settings user can configure which GNSS system(s) to use.<br />User has a choice to use only one system between GPS, GLONASS, Galileo or Beidou and it is possible to choose two or three systems together. One exception is that you cannot combine BeiDou and GLONASS systems together. Examples of non-configurable GNSS source combinations are:
In ''GNSS Source'' settings user can configure which GNSS system(s) to use.<br />User has a choice to use only one system between GPS, GLONASS, Galileo or Beidou and it is possible to choose two or three systems together. One exception is that you cannot combine BeiDou and GLONASS systems together. Examples of non-configurable GNSS source combinations are:
