Changes

First of all, in the FMB225 configurator you have to set parameters for RS232 or RS485 (depends on which RS232 or RS485 port you are using) in global parameters window.  

First of all, in the FMB225 configurator you have to set parameters for RS232 or RS485 (depends on which RS232 or RS485 port you are using) in global parameters window.  

[[Image:FMB225_RS232_configuration_window232.gif]]

[[Image:FMB125_RS232_configuration_window232.gif]]

Here in RS232 settings section Baudrate can be chosen to any available. Mode has to be chosen to TCP Ascii.

Here in RS232 settings section Baudrate can be chosen to any available. Mode has to be chosen to TCP Ascii.

(Please keep in mind that external device RX cable needs to be connected to FMB225 device TX cable and external device TX cable connected to FMB225 RX cable.)

(Please keep in mind that external device RX cable needs to be connected to FMB225 device TX cable and external device TX cable connected to FMB225 RX cable.)

[[Image:FMB225_Hercules_window 1.1.png|600px|none]]

[[Image:FMB125_Hercules_window 1.1.png|600px|none]]

Here you have to choose TCP Server section from the upper menu. In the marked fields:

Here you have to choose TCP Server section from the upper menu. In the marked fields:

Please select correct COM Port (1). In this case we use COM21. Then press connect (2).

Please select correct COM Port (1). In this case we use COM21. Then press connect (2).

[[Image:FMB225 Terminal window.png|800px|none]]

[[Image:FMB125 Terminal window.png|800px|none]]

Open Hercules application and just type your message in the marked field (3) and press Send button (4). If sent successfully, you will see it in Hercules Sent data field (Figure 4). For example test text will be sent: Hello, lets test TCP link mode. In Codec.12 format it looks: 00000000000000260C01050000001e48656c6c6f2c206c657473207465737420544350206c696e6b206d6f64650100001aef

Open Hercules application and just type your message in the marked field (3) and press Send button (4). If sent successfully, you will see it in Hercules Sent data field (Figure 4). For example test text will be sent: Hello, lets test TCP link mode. In Codec.12 format it looks: 00000000000000260C01050000001e48656c6c6f2c206c657473207465737420544350206c696e6b206d6f64650100001aef

On terminal you should now receive message:

On terminal you should now receive message:

[[Image:FMB225 Terminal window1.png|800px|none]]

[[Image:FMB125 Terminal window1.png|800px|none]]

==Step 5. Sending from external device to server over Terminal==

==Step 5. Sending from external device to server over Terminal==

For testing data sending from external device to server, enter text you want to send on Terminal and press send.  

For testing data sending from external device to server, enter text you want to send on Terminal and press send.  

[[Image:FMB225 Terminal window2.png|800px|none]]

[[Image:FMB125 Terminal window2.png|800px|none]]

You can check if data is received to server in Hercules.

You can check if data is received to server in Hercules.

Sample text: Hello, lets test TCP link mode. Please keep in mind, that special chars (ASCII Names) needs to be marked.

Sample text: Hello, lets test TCP link mode. Please keep in mind, that special chars (ASCII Names) needs to be marked.

[[Image:FMB225 Hercules window3.png|800px|none]]

[[Image:FMB125 Hercules window3.png|800px|none]]

===Links for download===

===Links for download===