Changes

no edit summary
Line 1: Line 1: −
AutoCAN function allows user to automatically scan for available messages on CAN bus and configure CAN data sending to server. In order to configure AutoCAN connect {{model=FMB630}} to computer with Port ½ cable. Launch FMB630 configurator version 1.1.1.7 or higher. Push “Connect“ button, then „CAN“ button. CAN configuration menu will be opened.
+
AutoCAN function allows user to automatically scan for available messages on CAN bus and configure CAN data sending to server. In order to configure AutoCAN connect {{model|FMB630}} to computer with Port ½ cable. Launch {{model|FMB630}} configurator version 1.1.1.7 or higher. Push “Connect“ button, then „CAN“ button. CAN configuration menu will be opened.
    
{{{image1|[[Image:FMB630_autoCAN1.png|center|200px]]}}}
 
{{{image1|[[Image:FMB630_autoCAN1.png|center|200px]]}}}
Line 5: Line 5:  
* SCAN scans once for available messages on CAN bus;
 
* SCAN scans once for available messages on CAN bus;
 
* Monitoring – toggles scanning of messages on CAN bus every 3 seconds;
 
* Monitoring – toggles scanning of messages on CAN bus every 3 seconds;
* Offline Configuration – enables CAN configuration when {{model=FMB630}} is not connected to CAN bus;
+
* Offline Configuration – enables CAN configuration when {{model|FMB630}} is not connected to CAN bus;
 
* Auto CAN tab – configure CAN by selecting available messages from CAN bus;
 
* Auto CAN tab – configure CAN by selecting available messages from CAN bus;
 
* Manual CAN tab – Configure CAN by manually entering CAN message ID and data mask;
 
* Manual CAN tab – Configure CAN by manually entering CAN message ID and data mask;
Line 11: Line 11:  
{{{image2|[[Image:FMB630_autoCAN2.png|center|250px]]}}}
 
{{{image2|[[Image:FMB630_autoCAN2.png|center|250px]]}}}
   −
To start CAN configuration push “SCAN“ button. A table of all available CAN messages will appear (Figure 100). Description of columns:
+
To start CAN configuration push “SCAN“ button. A table of all available CAN messages will appear. Description of columns:
 
* Category – shows CAN message;
 
* Category – shows CAN message;
 
* Parameter – shows configurable parameter name;
 
* Parameter – shows configurable parameter name;
Line 40: Line 40:  
Monitoring filters menu allows choosing which data will be shown in configuration menu. To enable/disable particular data monitoring use checkbox next to data name. To enable all data monitoring click Select all, to disable all data monitoring click Select none.
 
Monitoring filters menu allows choosing which data will be shown in configuration menu. To enable/disable particular data monitoring use checkbox next to data name. To enable all data monitoring click Select all, to disable all data monitoring click Select none.
   −
Note: CAN monitoring is {{model=FMB630}} configurator function; it does not enable data sending to server. In order to configure data sending to server refer to Configuration section.
+
Note: CAN monitoring is {{model|FMB630}} configurator function; it does not enable data sending to server. In order to configure data sending to server refer to Configuration section.

Navigation menu