174
edits
Changes
Template:FMB640 Features settings (view source)
Revision as of 14:15, 22 August 2019
, 14:15, 22 August 2019→Green Driving
0 – GNSS - GPS Data will be used to detect harsh driving. (This algorithm was used in FM53, FM63 devices) <br>
0 – GNSS - GPS Data will be used to detect harsh driving. (This algorithm was used in FM53, FM63 devices) <br>
1 – Accelerometer – Accelerometer data will be used to detect harsh driving. (This algorithm is from FMB device family). Accelerometer calibration needs to be performed with “auto_calibrate:set” command. <br>
1 – Accelerometer – Accelerometer data will be used to detect harsh driving. (This algorithm is from FMM device family). Accelerometer calibration needs to be performed with “auto_calibrate:set” command. <br>
2 – GNSS Algorithm A1 – GPS data will be used to detect harsh driving. (This algorithm is used in FMA11 devices). Main difference from FM53 is cornering detection which uses advanced math to more precisely calculate harsh cornering value across different vehicle speeds. <br>
2 – GNSS Algorithm A1 – GPS data will be used to detect harsh driving. (This algorithm is used in FMA11 devices). Main difference from FM53 is cornering detection which uses advanced math to more precisely calculate harsh cornering value across different vehicle speeds. <br>
3 – Accelerometer Algorithm A1 - Accelerometer data will be used to detect harsh driving. (This algorithm is used in FMA11 device family) <br>
3 – Accelerometer Algorithm A1 - Accelerometer data will be used to detect harsh driving. (This algorithm is used in FMA11 device family) <br>
<b>Note:</b> To use “Accelerometer Algorithm A1” option user need to install device as in Figure 1. {{{pic_accelerometerposition|[[Image:FMB640accelerometerposition.png|300px|right]]}}} FM64 Devcie accelerometer position. (With positive Z axis pointing to Ground and antennas face forward in vehicle). Before operation with vehicle on level ground user must send “setacc” SMS.
<b>Note:</b> To use “Accelerometer Algorithm A1” option user need to install device as in Figure 1. {{{pic_accelerometerposition|[[Image:FMM640accelerometerposition.png|300px|right]]}}} FM64 Devcie accelerometer position. (With positive Z axis pointing to Ground and antennas face forward in vehicle). Before operation with vehicle on level ground user must send “setacc” SMS.
# The vehicle is stopped.
# The vehicle is stopped.
# There is a straight road ahead.
# There is a straight road ahead.
# Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMB}}} device.
# Send SMS ''"auto_calibrate:set"'' to the {{{model_2|FMM}}} device.
# Accelerate to >30 km/h for 5 sec.
# Accelerate to >30 km/h for 5 sec.
# {{{model_2|FMB}}} will send a response when calibration is completed successfully.
# {{{model_2|FMM}}} will send a response when calibration is completed successfully.
Calibration is saved to internal flash memory, which means it will stay after a reset.
Calibration is saved to internal flash memory, which means it will stay after a reset.
To check auto-calibration status send a following short text message to the {{{model_2|FMB}}} device: ''"auto_calibrate:get"''.
To check auto-calibration status send a following short text message to the {{{model_2|FMM}}} device: ''"auto_calibrate:get"''.
==Over Speeding==
==Over Speeding==
