3,223
edits
Changes
Template:FMB640 RS-232 and RS-485 (view source)
Revision as of 14:34, 10 July 2019
, 14:34, 10 July 2019→RS-232 modes
Garmin provides a Fleet Management Interface Tool Kit, once {{{model|FMB640}}} is connected to the navigator it enables the driver to have a "screen" in their vehicle for real-time navigation and messaging, and offers job dispatch capabilities to help them be more efficient.<br/>{{{model|FMB640}}} and Garmin operational diagram is shown on the figure below.
Garmin provides a Fleet Management Interface Tool Kit, once {{{model|FMB640}}} is connected to the navigator it enables the driver to have a "screen" in their vehicle for real-time navigation and messaging, and offers job dispatch capabilities to help them be more efficient.<br/>{{{model|FMB640}}} and Garmin operational diagram is shown on the figure below.
{{{image|[[Image:FMB640_garmin_block.png|800px|center]]}}}
{{{image|[[Image:FMB640_garmin_block.png|800px|center]]}}}
* RS-232 LLS mode:
In order to use LLS fuel counter the newest firmware version is needed which can be obtained from Teltonika or a representative. Firmware is updated over GPRS or using cable update method. <br>
The LLS fuel sensor must be connected to the FMB640 device. <br>
[image:FMB640_RS232_LLS.png]
Then FMB640 must be configured. Both fuel level and fuel temperature has to be set up by
configurator’s I/O menu: <br>
[image:FMB640_RS232_LLSmenu.png]
==Garmin protocols==
==Garmin protocols==
