Difference between revisions of "Template:FMB64 First start card"
From Wiki Knowledge Base | Teltonika GPS
| Line 10: | Line 10: | ||
| − | =='''How to insert SIM card'''== | + | =='''How to insert SIM card {{{battery|and connect the battery}}}'''== |
| − | + | # '''Unscrew''' 4 screws counterclockwise that are located on the '''bottom''' of the device. | |
| − | + | # Remove the '''cover'''. | |
| − | + | # Insert '''SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMB640}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}} | |
| − | + | {{{be_battery|# Connect '''battery''' as shown to device.}}} | |
| − | + | # After '''configuration''', see “'''[[{{{model|FMB640}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back. | |
| − | + | # '''Screw''' in all screws. Device is ready to be mounted. | |
| − | [[Image: | + | [[Image:{{{sim_insert_pic1|{{{model|Fmb640}}}-cover-1.png}}}|260px]][[Image:{{{sim_insert_pic2|{{{model|Fmb640}}}-cover-2.png}}}|260px]][[Image:{{{sim_insert_pic3|{{{model|Fmb640}}}-cover-3.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-4.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-5.png}}}|260px]][[Image:{{{sim_insert_pic4|{{{model|Fmb640}}}-cover-6.png}}}|260px]] |
Revision as of 13:55, 2 March 2020
Leading GNSS/GSM/Bluetooth Terminal for advanced applications
How to insert SIM card and connect the battery
- Unscrew 4 screws counterclockwise that are located on the bottom of the device.
- Remove the cover.
- Insert SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that SIM card cut-off corner is pointing forward to slot. SIM slot 1 is closer to PCB, SIM slot 2 is the upper one.
- Connect battery as shown to device.
- After configuration, see “PC Connection (Windows)”, attach device cover back.
- Screw in all screws. Device is ready to be mounted.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
