Difference between revisions of "Template:FMB965 First start card"

From Wiki Knowledge Base | Teltonika GPS
 
(5 intermediate revisions by one other user not shown)
Line 2: Line 2:
  
 
<b>{{{description|Small and smart tracker with Bluetooth}}}</b>
 
<b>{{{description|Small and smart tracker with Bluetooth}}}</b>
{{{pic|[[Image:Fmb965 main.png|400px|right]]}}}
+
{{{pic|[[Image:FMB965_4000X4000_1.png|450px|right]]}}}
 
<br>
 
<br>
  
Line 9: Line 9:
  
  
=='''How to insert Micro-SIM card'''==
+
=='''How to insert Nano-SIM card'''==
  
 
{{{with_battery|
 
{{{with_battery|
# Gently remove {{{model|FMB9YX}}} '''cover''' using '''plastic pry tool''' from both sides.
+
# Gently remove {{{model}}} '''cover''' using '''plastic pry tool''' from both sides.
 
# gently lift the PCB out of the cover
 
# gently lift the PCB out of the cover
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB9YX}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing outwards to slot.
+
# Insert '''{{{sim_type|Nano-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[{{{model|FMB965}}} Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Nano-}}}SIM card '''cut-off corner''' is pointing outwards to slot.
 
# Connect the battery as shown on device.
 
# Connect the battery as shown on device.
 
# Place PCB back into the place as shown in the picture, first the end that is marked as '''1''' needs to inserted, then the end that is marked as '''2'''
 
# Place PCB back into the place as shown in the picture, first the end that is marked as '''1''' needs to inserted, then the end that is marked as '''2'''
Line 29: Line 29:
 
{|
 
{|
 
|-
 
|-
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
+
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Nano-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Nano-}}}SIM card might be damaged or device will not detect it.</b>
 
|}
 
|}

Latest revision as of 11:11, 21 February 2024

Qsg rut950 teltonika.PNG

Small and smart tracker with Bluetooth

FMB965 4000X4000 1.png




How to insert Nano-SIM card

  1. Gently remove {{{model}}} cover using plastic pry tool from both sides.
  2. gently lift the PCB out of the cover
  3. Insert Nano-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Nano-SIM card cut-off corner is pointing outwards to slot.
  4. Connect the battery as shown on device.
  5. Place PCB back into the place as shown in the picture, first the end that is marked as 1 needs to inserted, then the end that is marked as 2
  6. Attach device cover back. Device is ready to be connected.

FMB965 sim ir battery insert-1.png FMB965 sim ir battery insert-2.png FMB965 sim ir battery insert-3.png FMB965 sim ir battery insert-4.png FMB965 sim ir battery insert-5.png FMB965 sim ir battery insert-6.png


Alert.png
Nano-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Nano-SIM card might be damaged or device will not detect it.