Difference between revisions of "Template:FMB96X First start card"

From Wiki Knowledge Base | Teltonika GPS
(Created page with "centre <b>Teltonika FMB962 is SPECIAL and smart tracker with Blue-tooth connectivity, internal high gain GNSS and GSM antennas and integra...")
 
 
(12 intermediate revisions by 5 users not shown)
Line 2: Line 2:
  
  
−
<b>Teltonika FMB962 is SPECIAL and smart tracker with Blue-tooth connectivity, internal high gain GNSS and GSM antennas and integrated high capacity backup battery.</b> {{{pic|[[File:FMB962 main.png|400px|right]]}}}
+
<b>{{{description|Special and smart tracker with wide power supply range and high capacity internal Ni-MH battery}}}</b> {{{pic|[[File:FMB962 main.png|400px|right]]}}}
  
  
Line 8: Line 8:
  
  
−
==<span style=color:#104996>'''How to insert micro SIM card into {{{model|FMB96X}}}'''</span>==
 
  
−
<br/><br/>
 
  
−
[[File:FMB96X SIMcard.png|x1000px|center]]
 
−
 
−
[[File:Alert.png|thumb|left]]
 
−
<br/><br/>
 
−
<b>Note: micro-SIM card insertion/removal must be performed when FMB device is powered off – external voltage and battery disconnected. Otherwise micro-SIM card might be damaged or FMB device will not detect it.
 
  
−
<br/><br/>
 
  
−
==<span style=color:#104996>'''How to insert SD card into {{{model|FMB96X}}}'''</span>==
+
=='''How to insert Micro-SIM card'''==
  
−
<span style=color:#F49E21> 1. </span> Push microSD card lock case.
+
{{{without_battery|
 +
# Gently remove {{{model|FMB96X}}} '''cover''' using '''plastic pry tool''' from both sides.
 +
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB962 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
 +
# Attach device '''cover''' back.
 +
# Device is ready to be connected.}}}
  
−
<span style=color:#F49E21> 2. </span> Open microSD card locker.
+
{{{with_battery|
 +
# Gently remove {{{model|FMB96X}}} '''cover''' using '''plastic pry tool''' from both sides.
 +
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB962 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot.
 +
# Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
 +
# Attach device '''cover''' back. Device is ready to be connected.}}}
  
−
<span style=color:#F49E21> 3. </span> Correctly insert microSD card into slot.
 
  
−
<span style=color:#F49E21> 4. </span> Close microSD card locker.
+
[[Image:FMB964_SIM_Battery_1.png|280px]][[Image:FMB964_sim_battery_insert_2.png|280px]][[Image:FMB964_sim_battery_insert_3.png|280px]][[Image:FMB964_sim_battery_insert_4.png|280px]]
  
−
<span style=color:#F49E21> 5. </span> Push microSD card lock case to locked position.
 
  
−
 
+
{|
−
[[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]]
+
|-
 +
| [[File:Alert.png|left|link=]] || <b>Note: {{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b>
 +
|}

Latest revision as of 16:08, 30 March 2020

Qsg rut950 teltonika.PNG


Special and smart tracker with wide power supply range and high capacity internal Ni-MH battery

FMB962 main.png





How to insert Micro-SIM card

  1. Gently remove FMB96X cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Attach device cover back.
  4. Device is ready to be connected.


  1. Gently remove FMB96X cover using plastic pry tool from both sides.
  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
  4. Attach device cover back. Device is ready to be connected.


FMB964 SIM Battery 1.pngFMB964 sim battery insert 2.pngFMB964 sim battery insert 3.pngFMB964 sim battery insert 4.png


Alert.png
 Note: Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:FMB96X_First_start_card&oldid=55957"