Difference between revisions of "Template:FMB9 First start card"

From Wiki Knowledge Base | Teltonika GPS
(Undo revision 34138 by Mariusandruska (talk))
Line 24: Line 24:
 
the lid by two screws as shown
 
the lid by two screws as shown
  
[[Image:Sim_1.png|280px]][[Image:Batt_2.png|280px]][[Image:Usb_3.png|280px]][[Image:Screw_4.png|280px]]
+
[[Image:Fmb920_cover_1.png|280px]][[Image:Fmb920_cover_2.png|280px]][[Image:Fmb920_cover_3.png|280px]][[Image:Fmb920_cover_4.png|280px]]
  
  

Revision as of 07:52, 7 May 2019

Qsg rut950 teltonika.PNG

Small and smart tracker with Blue-tooth

Fmb920 main.png




How to insert Micro-SIM card

  • Insert Micro-SIM card as shown with PIN request disabled or

read our Wiki how to enter PIN later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.

  • Connect battery as shown to device.
  • Connect micro usb cable as shown
  • To power up TST100, connect green plug to the E-scooter
  • Open Teltonika configurator, select TST100 device and

configure it according to your requirements (how to install drives on page

  • Once all done, disconnect TST100 from PC and E-scooter. Attach

the lid by two screws as shown

Fmb920 cover 1.pngFmb920 cover 2.pngFmb920 cover 3.pngFmb920 cover 4.png


Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.