Difference between revisions of "Template:FMB9 First start card"
From Wiki Knowledge Base | Teltonika GPS
(Undo revision 34138 by Mariusandruska (talk)) |
(Undo revision 34139 by Mariusandruska (talk)) |
||
Line 31: | Line 31: | ||
| [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b> | | [[File:Alert.png|left|link=]] || <b>{{{sim_type|Micro-}}}SIM card insertion/removal must be performed when device is powered off – external voltage {{{battery|and internal battery}}} disconnected. Otherwise {{{sim_type|Micro-}}}SIM card might be damaged or device will not detect it.</b> | ||
|} | |} | ||
+ | |||
+ | =='''How to insert microSD card'''== | ||
+ | |||
+ | # Push microSD card lock case. | ||
+ | # Open microSD card locker. | ||
+ | # Correctly insert microSD card into slot. | ||
+ | # Close microSD card locker. | ||
+ | # Push microSD card lock case to locked position. | ||
+ | |||
+ | <b>NOTE:</b> SD cards are only used in devices manufactured until '''2018-04'''. Newer devices have internal flash memory. | ||
+ | |||
+ | [[Image:Sd_card_1.png|x150px]] [[Image:Sd_card_2.png|x150px]] [[Image:Sd_card_3.png|x150px]] [[Image:Sd_card_4.png|x150px]] [[Image:Sd_card_5.png|x150px]] |
Revision as of 07:53, 7 May 2019
Small and smart tracker with Blue-tooth
How to insert Micro-SIM card
- Insert Micro-SIM card as shown with PIN request disabled or
read our Wiki how to enter PIN later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect battery as shown to device.
- Connect micro usb cable as shown
- To power up TST100, connect green plug to the E-scooter
- Open Teltonika configurator, select TST100 device and
configure it according to your requirements (how to install drives on page
- Once all done, disconnect TST100 from PC and E-scooter. Attach
the lid by two screws as shown
![]() |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
How to insert microSD card
- Push microSD card lock case.
- Open microSD card locker.
- Correctly insert microSD card into slot.
- Close microSD card locker.
- Push microSD card lock case to locked position.
NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.