Template:FMB9 First start card

From Wiki Knowledge Base | Teltonika GPS
Qsg rut950 teltonika.PNG

Small and smart tracker with Blue-tooth

Fmb920 main.png




How to insert Micro-SIM card

  • Insert Micro-SIM card as shown with PIN request disabled or

read our Wiki how to enter PIN later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.

  • Connect battery as shown to device.
  • Connect micro usb cable as shown
  • To power up TST100, connect green plug to the E-scooter
  • Open Teltonika configurator, select TST100 device and

configure it according to your requirements (how to install drives on page

  • Once all done, disconnect TST100 from PC and E-scooter. Attach

the lid by two screws as shown

Sim 1.pngBatt 2.pngUsb 3.pngScrew 4.png


Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.

How to insert microSD card

  1. Push microSD card lock case.
  2. Open microSD card locker.
  3. Correctly insert microSD card into slot.
  4. Close microSD card locker.
  5. Push microSD card lock case to locked position.

NOTE: SD cards are only used in devices manufactured until 2018-04. Newer devices have internal flash memory.

Sd card 1.png Sd card 2.png Sd card 3.png Sd card 4.png Sd card 5.png