Changes

[[Image:GNSS_Jamming.PNG|{{{general|size}}}|right]]

[[Image:GNSS_Jammingass.PNG|{{{general|size}}}|right]]

GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio.  

GNSS Jamming is the transmission of radio signals that disrupts communications between tracker and satellites by decreasing the signal to noise ratio.  

'''Note:''' GNSS Jamming is only available since 03.28.03.Rev.03 or newer firmware version.

'''Note:''' GNSS Jamming is only available since 03.28.03.Rev.03 or newer firmware version.

'''Note:''' GNSS Jamming is not available on 3.80, 3.82 GNSS modules but available on 5.10, 5.1.5, 5.1.8 or newer modules. GNSS module version can be checked by SMS\GPRS command - getver

'''Note:''' GNSS Jamming is not available on 3.80, 3.82 but available on 5.10, 5.1.5, 5.1.8 or newer GNSS module firmware versions. GNSS module version can be checked by SMS\GPRS command - getver

'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.

'''Note''' that this scenario will not work with [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]], [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] and [[{{{model|FMB1YX}}}_Sleep_modes#Online_Deep_Sleep_mode|Online Deep Sleep]] modes, since they disable the device's GNSS module to save power.

{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==

{{{dout_control_via_ignition_feature|==DOUT Control Via Ignition==

[[Image:DOUT_Control_Via_Ignition.gif|{{{dout_control_via_ignition|size}}}|right]]

[[Image:DOUT Control Via Ignition.jpg|{{{dout_control_via_ignition|size}}}|right]]

This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/>

This feature allows direct control of DOUT by configured ignition source status. When enabled, the function will start to monitor ignition status, and once the ignition changes state from On to Off after configured Ignition Off a timeout, selected DOUT (Digital Output) will be turned On.<br/><br/>

         <th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th>

         <th style="width: 10%; text-align:left; vertical-align:middle; color:black">Parameter name</th>

         <th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>

         <th style="width: 20%; text-align:center; vertical-align:middle; color:black">Description</th>

     </tr>

     </tr>

<tr>

<tr>