Changes

no edit summary
Line 52: Line 52:  
[[Image:Fmb120_on_delta_change.png|x150px|none]]
 
[[Image:Fmb120_on_delta_change.png|x150px|none]]
 
==Avg Const==
 
==Avg Const==
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep mode]].<br/>Averaging follows RC exponential curve, see image below:
+
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep mode]].<br />Averaging follows RC exponential curve, see image below:
 
[[Image:Fmb120_avg_const.png|300px|none]]
 
[[Image:Fmb120_avg_const.png|300px|none]]
 
For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.
 
For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.
 +
 +
[[File:Alert.png|x30px|]]'''''NOTE: Average Constant is not used as an activation timer or delay timer. But it is used as a filter.'''
 +
''
 +
 +
Event is generated at different times due to variations in voltage. Average constant is designed to filter jumps instead of event generation time.
 +
 +
For example: generation is set to happen at  14500mV, and actual voltage is set to 15000mV, that record will be generated earlier than 10s with avg const set to 100. This is because avg const is calculating time it takes for device to get to actual voltage (in this case 15000 mV), while device will be generating records when it hits 14500mV.
 +
 
==Send SMS To==
 
==Send SMS To==
 
Sends SMS notification about event to selected number from [[{{{model|FMB1YX}}}_SMS/Call_settings|SMS/Call Settings]] '''GSM Predefined Numbers''' list if event priority is set to [[#Low Priority|Low]], [[#High Priority|High]] or [[#Panic Priority|Panic]].
 
Sends SMS notification about event to selected number from [[{{{model|FMB1YX}}}_SMS/Call_settings|SMS/Call Settings]] '''GSM Predefined Numbers''' list if event priority is set to [[#Low Priority|Low]], [[#High Priority|High]] or [[#Panic Priority|Panic]].
Line 322: Line 330:  
{|
 
{|
 
|-
 
|-
| [[File:Alert.png|left|80px|link=]] || <b>If {{{model|FMB1YX}}} is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]] or [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode and an SMS event occurs with [[#Low Priority|Low priority]] (which does not wake up {{{model|FMB1YX}}}), then the device does not send the message. It is saved to device memory until it wakes up from [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]] or [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode and GSM modem starts working normally. After it wakes up, all the messages that are saved to memory will be sent, but keep in mind that only 10 messages can be saved to memory – all other messages will not be saved, until there is free memory space.</b>
+
|[[File:Alert.png|left|80px|link=]]||<b>If {{{model|FMB1YX}}} is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]] or [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode and an SMS event occurs with [[#Low Priority|Low priority]] (which does not wake up {{{model|FMB1YX}}}), then the device does not send the message. It is saved to device memory until it wakes up from [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep]] or [[{{{model|FMB1YX}}}_Sleep_modes#Ultra_Deep_Sleep_mode|Ultra Deep Sleep]] mode and GSM modem starts working normally. After it wakes up, all the messages that are saved to memory will be sent, but keep in mind that only 10 messages can be saved to memory – all other messages will not be saved, until there is free memory space.</b>
 
|}
 
|}

Navigation menu