256
edits
Changes
Template:FMC640 Auto Geofence settings (view source)
Revision as of 12:50, 26 June 2020
, 12:50, 26 June 2020no edit summary
AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message.
AutoGeofence – the last known position after movement = off. If your car is being taken away – you can be notified. The shape and size of the geofence zones are configurable. There is a possibility to state whether entering in or out of the geofence triggers an asynchronous message.
Auto Geofencing option can be configured by following parameters:
Auto Geofencing option can be configured by following parameters:
*Priority – Priority of generated event, which will be applied to saved record.
*Priority – Priority of generated event, which will be applied to saved record.
*Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL
*Eventual Records - Scenario status will be (or not, if disabled) sent with each AVL
record.
record.
Generate Event:
Generate Event:
*On Entrace – Event generation on Geofence entrance.
*On Entrace – Event generation on Geofence entrance.
*On Exit – Event generation on Geofence exit.
*On Exit – Event generation on Geofence exit.
*On Both - Event generation on Geofence entrance or exit.
*On Both - Event generation on Geofence entrance or exit.
*Activation Timeout – Time period before Geofence is activated after vehicle stops.
*Activation Timeout – Time period before Geofence is activated after vehicle stops.
*Radius - Radius of circle where in center of it is last coordinates of device when vehicle
*Radius - Radius of circle where in center of it is last coordinates of device when vehicle
engine was running.
engine was running.
Deactivate By:
Deactivate By:
*Ignition – if ignition becomes high it will drop AutoGeofenze Zone
*Ignition – if ignition becomes high it will drop AutoGeofenze Zone
*iButton – if iButton is attached it will drop AutoGeofence Zone
*iButton – if iButton is attached it will drop AutoGeofence Zone
*Engine RPM - if engine RPM becomes more than zero it will drop AutoGeofence zone
