Template:FMC650 BLE module update

Revision as of 09:21, 1 February 2022 by Arnas.Zeb (talk | contribs) (Created page with "==Update via Configurator== The BLE Firmware for FMC650 devices can be update via Configurator. Firstly, you should obtain the BLE FW file from your Sales Manager, then connec...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Update via Configurator

The BLE Firmware for FMC650 devices can be update via Configurator. Firstly, you should obtain the BLE FW file from your Sales Manager, then connect the device to the PC, open configurator, press on "Bluetooth 4.0" tab and at the bottom you will find "Transfer BLE Firmware file" with the "Upload" button. Press "Upload" button, choose BLE FW file, click OK and the device will be updated shortly.

BLE Update Configurator.png

Update via FOTA WEB

The BLE Firmware for FMC650 devices can now be updated Over The Air by using FOTA WEB. Updating the BLE can enhanced performance and stability of BLE devices.

Please note: - the minimal device firmware that supports over the air BLE update is 01.00.02. - the minimal BLE firmware version is v0.1.5 In order to update your device‘s BLE firmware please follow a quick and simple step-by-step guide below. The procedure is the same for all devices. To get the module's firmware file, please contact your sales manager or fill a query in the VIP helpdesk.

FMC650 device must be registered in FOTA Web – device‘s model, firmware version, serial number and other information must be shown.

FMC650 device must have a correct device firmware version uploaded (Minimal device firmware 01.00.02). Once device with correct device firmware version connects to FOTA Web on the next scheduled connection (or instant connection, initiated by an SMS command "web_connect"), the data about the device will be updated.


04 FMx640 bluetooth update.jpg


To update BLE a check-box needs to be ticked, then „Create task“ button pressed and „Update BLE firmware“ selected:

03 FMX640 bluetooth update.gif


Once the software update task has been assigned, it can be seen in the main window. Please note, that uploading will start after the next scheduled connection to Fota Web (or instant connection, initiated by an SMS command "web_connect"):