4,628
edits
Changes
Template:FMC Features settings (view source)
Revision as of 14:49, 10 November 2023
, 14:49, 10 November 2023no edit summary
{{{seco_feature|==SECO==
{{{seco_feature|==SECO==
[[Image:SECO.png|{{{general|size}}}||right]]
[[Image:SECO.png|right]]
The solution, introduced in firmware version 03.28.02, is designed to stop a stolen vehicle without causing accidents. It accomplishes this by pulsing digital output to disable the fuel pump at intervals until the vehicle slows down to a configured speed, at which point the pump is fully disabled.<br />Parameters used with ''SECO'' functionality are given in a table below.
The solution, introduced in firmware version 03.28.02, is designed to stop a stolen vehicle without causing accidents. It accomplishes this by pulsing digital output to disable the fuel pump at intervals until the vehicle slows down to a configured speed, at which point the pump is fully disabled. <br>
<table class="nd-othertables" style="width: 80%;">
*The secure vehicle disabling solution is supported by any Teltonika FMB series tracker (excluding FMX640 series trackers) which has one or more digital output (DOUT) which in this scenario is used to control fuel pump of the car.
<tr>
<th style="width: 20%; text-align:left; vertical-align:middle; color:black">Parameter name</th>
<th style="width: 71%; text-align:center; vertical-align:middle; color:black">Description</th>
<th style="width: 9%; text-align:center; vertical-align:center; color:black">SMS code</th>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Scenario Settings</td>
<td style="width: 8%; text-align:left">Enable/Disable SECO functionality</td>
<td style="width: 8%; text-align:center">12250</td>
</tr>
<tr>
<td style="width: 8%; text-align:left;">Eventual Records</td>
<td style="width: 8%; text-align:left">If disabled - scenario status value will be appended in each AVL record</td>
<td style="width: 8%; text-align:center">12251</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Output Control</td>
<td style="width: 8%; text-align:left">Available scenario settings for module Digital output activation/deactivation</td>
<td style="width: 8%; text-align:center">12252</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Speed</td>
<td style="width: 8%; text-align:left">Digital output will be activated if vehicle speed consistently lower than configured during "Speed check period"</td>
<td style="width: 8%; text-align:center">12254</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Speed Pulse scenario</td>
<td style="width: 8%; text-align:left">Valid if "Output Pulse" feature enabled. Scenario will be activated if vehicle speed consistently lower than configured during "Speed check period". After activation digital output will be activated and disabled continuously until speed will be lower then configured in "Speed" field and longer then "Speed check period"</td>
<td style="width: 8%; text-align:center">12259</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Speed check period</td>
<td style="width: 8%; text-align:left">Time span during which vehicle speed must be lower than configured for output to activate.</td>
<td style="width: 8%; text-align:center">12255</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Momevemt timeout</td>
<td style="width: 8%; text-align:left">Accelerometer's instant movement timeout after which output will be activated (GNSS OFF)</td>
<td style="width: 8%; text-align:center">12256</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">Output pulse</td>
<td style="width: 8%; text-align:left">Pulse scenario adds additional output control which helps to slow down vehicle before fully disabling fuel pump.</td>
<td style="width: 8%; text-align:center">12253</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">DOUT ON duration</td>
<td style="width: 8%; text-align:left">A value in milliseconds, for how long DOUT should be active</td>
<td style="width: 8%; text-align:center">12257</td>
</tr>
<tr>
<td style="width: 8%; text-align:left">DOUT OFF duration</td>
<td style="width: 8%; text-align:left">A value in milliseconds, for how long DOUT should be inactive</td>
<td style="width: 8%; text-align:center">12258</td>
</tr>
</table>
===SECO SMS Commands===
Secure engine cut-off (SECO) functionality is available for device with at least one DOUT. For SECO functionality to work, DOUT must to be selected. SECO has DOUT control priority higher than immobilizer scenario.<br>
SECO scenario can only be enabled or disabled by SMS commands:<br>
*"secoon" - to activate SECO functionality.
*"secooff" - to disable SECO functionality.
The structure of sending SMS commands: [[FMB130 SMS/GPRS Commands]]
==== 1. SMS responses====
To SMS command „secooff“ device will give response: „Seco off received. DOUTX off“.
To SMS command „secoon“ response:
1. „Seco on received. Waiting for conditions“.
2. „Seco on received. DOUTX pulsing“.
3. „Seco on received. DOUTX on“.
When response is not 3 all later SMS will be received. Example: SMS 1 received and pulse configured, then SMS 2 will be received when speed is lower than configured and SMS 3 will be received when speed reaches 0 km/h. <br>
'''Note:'''
Sending commands to the device without DOUT will give response "SECO not available for this device". When DOUT is not selected in configuration response will be: "Error. no DOUT configured". This secure vehicle disabling solution is supported by any Teltonika FMB series tracker (excluding FMX640 series trackers), also SIM card is in order to get data to your server.
}}}
{{{ibutton_feature|==iButton Read Notification==
{{{ibutton_feature|==iButton Read Notification==