Changes

==Step 2. Setting parameters in configurator for TCP Ascii mode test==

==Step 2. Setting parameters in configurator for TCP Ascii mode test==

First of all, in the {{{model|FMU1YX}}} configurator you have to set parameters for RS232 (depends on which RS232 port you are using) in global parameters window.  

First of all, in the {{{model|FMU1YX}}} configurator you have to set parameters for RS232 in global parameters window.  

[[Image:FMU126 RS232 configuration window.png|500px|none]]

[[Image:FMU126 RS232 configuration window.png|500px|none]]

(Please keep in mind that external device RX cable needs to be connected to {{{model|FMU1YX}}} device TX cable and external device TX cable connected to {{{model|FMU1YX}}} RX cable.)

(Please keep in mind that external device RX cable needs to be connected to {{{model|FMU1YX}}} device TX cable and external device TX cable connected to {{{model|FMU1YX}}} RX cable.)

[[Image:FMB125 Hercules window.png|600px|none]]

[[Image:FMB125_Hercules_window 1.1.png|600px|none]]

Here you have to choose TCP Server section from the upper menu. In the marked fields:

Here you have to choose TCP Server section from the upper menu. In the marked fields:

==Step 4. Sending from server to external device over Hercules==

==Step 4. Sending from server to external device over Hercules==

When sending a message from Hercules, first you have to pack it in Codec.12 format. If you want to send a message to external device over {{{model|FMU1YX}}} from server, a packed message should be pasted into the Send field in Hercules (Figure 2, marked field 3). The HEX format box should be unchecked if the text is in HEX format (for example: $00$00$00$00$00$00$00$26$0C$01$05$00$00$00$1e$48$65$6c$6c$6f$2c$20$6c$65$74$73$20$74$65$73$74$20$54$43$50$20$6c$69$6

When sending a message from Hercules, first you have to pack it in Codec.12 format. If you want to send a message to external device over {{{model|FMU1YX}}} from server, a packed message should be pasted into the Send field in Hercules (Figure 2, marked field 3). The HEX format box should be unchecked if the text is in HEX format (for example: 00000000000000260C01050000001e48656c6c6f2c206c657473207465737420544350206c696e6b206d6f64650100001aef etc.). When you press Send button, you will see your message in the Sent data field (Terminal).

e$6b$20$6d$6f$64$65$01$00$00$1a$ef etc.). When you press Send button, you will see your message in the Sent data field (Terminal).

If the message is sent successfully to {{{model|FMU1YX}}}, you can check it in the Terminal window.

If the message is sent successfully to {{{model|FMU1YX}}}, you can check it in the Terminal window.

[[Image:FMB125 Terminal window.png|800px|none]]

[[Image:FMB125 Terminal window.png|800px|none]]

Open Hercules application and just type your message in the marked field (3) and press Send button (4). If sent successfully, you will see it in Hercules Sent data field (Figure 4). For example test text will be sent: Hello, lets test TCP link mode. In Codec.12 format it looks: $00$00$00$00$00$00$00$26$0C$01$05$00$00$00$1e$48$65$6c$6c$6f$2c$20$6c$65$74$73$20$74$65$73$74$20$54$43$50$20$6c$69$6e$6b$20$6d$6f$64$

Open Hercules application and just type your message in the marked field (3) and press Send button (4). If sent successfully, you will see it in Hercules Sent data field (Figure 4). For example test text will be sent: Hello, lets test TCP link mode. In Codec.12 format it looks: 00000000000000260C01050000001e48656c6c6f2c206c657473207465737420544350206c696e6b206d6f64650100001aef

[[Image:FMB125 Hercules window1.png|800px|none]]

[[Image:hercules_3-2-8_JF1VyeMy8I.jpg|800px|none]]

On terminal you should now receive message:

On terminal you should now receive message: