Changes

no edit summary
Line 1: Line 1: −
=='''How to insert {{{sim_type|Micro-}}}SIM card'''==
+
=='''How to insert {{{sim_type|Micro-}}}SIM card {{{battery|and connect the battery}}}'''==
   −
#Gently remove {{{model|FMB1YX}}} '''cover''' using '''plastic pry tool''' from both sides.
+
# Gently remove {{{model|FMM125}}} '''cover''' using '''plastic pry tool''' from both sides.<p><b>Note:</b> To properly open a new case please watch this [https://youtu.be/PBXVNXfRjg0 video].</p>
#Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read {{{sim_pin|[[FMB120 Security info|'''Security info''']]}}} how to enter it later in Configurator. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
+
# Insert '''{{{sim_type|Micro-}}}SIM''' card as shown with '''PIN request disabled''' or read '''[[{{{model|FMM125}}} Security info|Security info]]''' how to enter it later in [[Teltonika Configurator]]. Make sure that {{{sim_type|Micro-}}}SIM card '''cut-off corner''' is pointing forward to slot. {{{dual_sim|'''SIM slot 1''' is closer to PCB, '''SIM slot 2''' is the upper one.}}}
#Attach device '''cover''' back.
+
{{{be_battery|# Connect '''battery''' as shown to device. Position the battery in place where it does not obstruct other components.
#Device is ready to be connected.
+
# After '''configuration''', see “'''[[{{{model|FMM125}}}_First_Start#PC Connection (Windows)|PC Connection (Windows)]]'''”, attach device '''cover''' back.}}}
    
[[Image:FMC13A_cover1_correct.png|280px]][[Image:FMC13A_cover2_correct.png|280px]][[Image:FMC13A_cover3_correct.png|280px]][[Image:FMC13A_cover4_correct.png|280px]]
 
[[Image:FMC13A_cover1_correct.png|280px]][[Image:FMC13A_cover2_correct.png|280px]][[Image:FMC13A_cover3_correct.png|280px]][[Image:FMC13A_cover4_correct.png|280px]]