Template:FMX13A First start card withoutSD


(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

How to insert Micro-SIM card and connect the battery

  1. Gently remove FMM125 cover using plastic pry tool from both sides.

    Note: To properly open a new case please watch this video.

  2. Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Teltonika Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
  3. Connect battery as shown to device. Position the battery in place where it does not obstruct other components.
  4. After configuration, see “PC Connection (Windows)”, attach device cover back.

FMC13A cover1 correct.pngFMC13A cover2 correct.pngFMC13A cover3 correct.pngFMC13A cover4 correct.png

Alert.png
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it.