Wiki Knowledge Base | Teltonika GPS

Changes

Template:FMX640 Short Burst Data (view source)

Revision as of 09:32, 15 June 2023

4,415 bytes added ,  09:32, 15 June 2023
m
no edit summary
Line 109: Line 109:  
| 0
 
| 0
 
| 1440
 
| 1440
−
| 1440
+
| 0
 
| This parameter lets to configure Iridium Edge sending period
 
| This parameter lets to configure Iridium Edge sending period
 
|-
 
|-
Line 130: Line 130:  
| 1
 
| 1
 
| 5
 
| 5
−
| 0
+
| 1
 
| Device DOUT which can control ON/OFF pin of the Iridium Edge
 
| Device DOUT which can control ON/OFF pin of the Iridium Edge
 
|-
 
|-
Line 143: Line 143:  
<br></br>
 
<br></br>
 
'''*''' SBD IO source parameter is configured with bitmasks (used for configuring I/O source elements via SMS/GPRS command) :  
 
'''*''' SBD IO source parameter is configured with bitmasks (used for configuring I/O source elements via SMS/GPRS command) :  
−
*eSBD_IO_Bit_Disabled     = 0x00,
+
*Disabled     = 0x00,
−
*eSBD_IO_Bit_Din1         = 0x01,
+
*Din1         = 0x01,
−
*eSBD_IO_Bit_Din2         = 0x02,
+
*Din2         = 0x02,
−
*eSBD_IO_Bit_Din3         = 0x04,
+
*Din3         = 0x04,
−
*eSBD_IO_Bit_Din4         = 0x08,
+
*Din4         = 0x08,
−
*eSBD_IO_Bit_Do1         = 0x10,
+
*Dout1         = 0x10,
−
*eSBD_IO_Bit_Do2         = 0x20,
+
*Dout2         = 0x20,
−
*eSBD_IO_Bit_Do3         = 0x40,
+
*Dout3         = 0x40,
−
*eSBD_IO_Bit_Do4         = 0x80,
+
*Dout4         = 0x80,
−
*eSBD_IO_Bit_Speed       = 0x100
+
*Speed       = 0x100
 
<br></br>
 
<br></br>
−
For example: to enable Din1, Din3 and Do4: 0x01 + 0x04 + 0x80 = 0x85 convert to decimal --> 133.
+
For example: to enable Din1, Din3 and Dout4: 0x01 + 0x04 + 0x80 = 0x85 convert to decimal --> 133.
    
===Setting up Alarm priority records===
 
===Setting up Alarm priority records===
Line 191: Line 191:  
<br></br>
 
<br></br>
 
'''''SBD AVL ID and flags''''' – Custom ID that will indicate what caused the record to be generated (final ID will (as only periodic records are generated, ID is not used)).
 
'''''SBD AVL ID and flags''''' – Custom ID that will indicate what caused the record to be generated (final ID will (as only periodic records are generated, ID is not used)).
 +
This byte is divided in two parts of four bits, as shown in table below:
 +
 +
{| class="nd-othertables_2" style="width:100%;"
 +
|-
 +
! colspan="4" style="font-weight:bold;" | <br />Flags  (not used yet)
 +
! colspan="4" style="font-weight:bold;" | <br />SBD  AVL ID
 +
|- style="color:#fe0000;"
 +
| <br />Bit 7
 +
| <br />Bit 6
 +
| <br />Bit 5
 +
| <br />Bit 4
 +
| style="color:#3531ff;" | <br />Bit 3
 +
| style="color:#3531ff;" | <br />Bit 2
 +
| style="color:#3531ff;" | <br />Bit 1
 +
| style="color:#3531ff;" | <br />Bit 0
 +
|}
 +
<br></br>
 +
SBD AVL ID is used to show which IO element generated the Panic element. The list of currently implemented possible values is described below:
 +
<br></br>
 +
{|  class="nd-othertables_2" style="width:100%;"font-weight:bold; vertical-align:middle;"
 +
! style="font-weight:bold;" | <br />ID
 +
! <br />0
 +
! <br />1
 +
! <br />2
 +
! <br />3
 +
! <br />4
 +
! <br />5
 +
! <br />6
 +
! <br />7
 +
! <br />8
 +
! <br />9
 +
|-
 +
| style="font-weight:bold;" | <br />IO  element
 +
| <br />Periodic rec.
 +
| <br />Digital Input 1
 +
| <br />Digital input 2
 +
| <br />Digital input 3
 +
| <br />Digital input 4
 +
| <br />Digital output 1
 +
| <br />Digital output 2
 +
| <br />Digital output 3
 +
| <br />Digital output 4
 +
| <br />Speed
 +
|}
 
<br></br>
 
<br></br>
−
'''''DIN/DOUT info''''' - Displays configured IO elements in SBD IO source - (parameter ID 99422).
+
Data from Bit 7 to Bit 4 are not used at the moment. The server should ignore this data part.
 +
<br></br>
 +
'''''DIN/DOUT info''''' - Displays configured IO elements values of enabled IO elements in SBD IO source settings - (parameter ID 99422). Since digital inputs can contain only logic 1 or 0 they are bit masked in one byte.
 +
{| class="nd-othertables_2" style="width:100%;"font-weight:bold; vertical-align:middle;"
 +
|-
 +
! <br />DIN1
 +
! <br />DIN2
 +
! <br />DIN3
 +
! <br />DIN4
 +
! <br />DOUT1
 +
! <br />DOUT2
 +
! <br />DOUT3
 +
! <br />DOUT4
 +
|- style="font-weight:normal;"
 +
| <br />Bit 7
 +
| <br />Bit 6
 +
| <br />Bit 5
 +
| <br />Bit 4
 +
| <br />Bit 3
 +
| <br />Bit 2
 +
| <br />Bit 1
 +
| <br />Bit 0
 +
|}
 
<br></br>
 
<br></br>
 
'''''Reserved''''' - Not used.
 
'''''Reserved''''' - Not used.
 
<br></br>
 
<br></br>
 
'''''Speed''''' – Indicates the speed of the vehicle if configured. If not (or in case of no GPS) – it will display 255.
 
'''''Speed''''' – Indicates the speed of the vehicle if configured. If not (or in case of no GPS) – it will display 255.
 +
<br> </br>
 +
 +
==SBD packet example==
 +
'''Unparsed data:'''
 +
 +
<span style="color:#0000ff">''01004C01001CF99DD263333030323334303634303730383330000018000059282DBC03000B0036A2B8193D120000000302001C''
 +
<span style="color:#008000"> ''59282BA391F5ABCDBFDD0180000059282BA891F5ABCDBFDD0180000059282BA391F5AB'' </span>
 +
<br></br>
 +
<span style="color:#0000ff">{01} – Protocol revision number</span><br></br>
 +
<span style="color:#0000ff">{00}{4C} – overall message length</span><br></br>
 +
<span style="color:#0000ff">{01} – MO header IEI</span><br></br>
 +
<span style="color:#0000ff">{00}{1C} – MO header length</span><br></br>
 +
<span style="color:#0000ff">{F9}{9D}{D2}{63} – CDR Reference</span><br></br>
 +
<span style="color:#0000ff">{33}{30}{30}{32}{33}{34}{30}{36}{34}{30}{37}{30}{38}{33}{30} – IMEI of the device</span><br></br>
 +
<span style="color:#0000ff">{00} – Session status (Transfer OK in this case)</span><br></br>
 +
<span style="color:#0000ff">{00}{18} – MOMSN</span><br></br>
 +
<span style="color:#0000ff">{00}{00} – MTMSN</span><br></br>
 +
<span style="color:#0000ff">{59}{28}{2D}{BC} – Time of session</span><br></br>
 +
<span style="color:#0000ff">{03} – MO Location information IEI</span><br></br>
 +
<span style="color:#0000ff">{00}{0B} – MO Location information length</span><br></br>
 +
<span style="color:#0000ff">{00}{36}{A2}{B8}{19}{3D}{12} – MO latitude and longitude as described in Iridium documentation. </span><br></br>
 +
<span style="color:#0000ff">{00}{00}{00}{03} – CEP radius</span><br></br>
 +
<span style="color:#0000ff">{02} – Payload IEI </span><br></br>
 +
<span style="color:#0000ff">{00}{1C} – Payload length </span><br></br>
 +
<span style="color:#008000">{59}{28}{2B}{A3}{91}{F5}{AB}{CD}{BF}{DD}{01}{80}{00}{00} – Record 1</span> <br></br>
 +
<span style="color:#008000">{59}{28}{2B}{A8}{91}{F5}{AB}{CD}{BF}{DD}{01}{80}{00}{00} – Record 2 </span><br></br>
 +
 +
There blue part of record is satellite device generated data and green is actual record payload which was sent to server from {{{device|}}}. Information of the first record should be parsed like this:
 +
<br></br>
 +
<span style="color:#008000">{59}{28}{2B}{A3} – Timestamp of record generation in GMT0;</span> <br></br>
 +
<span style="color:#008000">{91}{F5}{AB} – Longitude (recalculated value is 25,255756) </span><br></br>
 +
<span style="color:#008000">{CD}{BF}{DD} – Latitude (recalculated value is 54,832396) </span><br></br>
 +
<span style="color:#008000">{01} – DIN1 generated event </span><br></br>
 +
<span style="color:#008000">{80} – DIN1 on, while DIN2, DIN3, DIN4, DOUT1, DOUT2, DOUT3, DOUT4 – off </span><br></br>
 +
<span style="color:#008000">{00} – Reserved byte</span> <br></br>
 +
<span style="color:#008000">{00} – Vehicle was stopped when the record was generated</span> <br></br>
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/77890...86717"